Tuesday 19 March, 2019
As I load a good 20k 45 a year, I really wanted to like it. Tried to get it to work for over a year. Was back and forth with customer service dozens of times, but regardless of what they say, this just does not work with a lot of lswc profile bullets. I, and a number of other bullseye shooters I have spoken with, have never been able to get it to work even though I was assured it would work before ordering it. I was forced to sell it. In the end I lost over 100$ and a ton of time on this. Not happy.
Monday 11 February, 2019
Struggling with the powder funnel/case opener provided. It was quite rough and causes the machine to shake when pulling it out of the case. I honed it with 1200grit paper and it got better but still sticky causing powder to spill. Will just have to load a couple of thousand and see if it gets smoother.
Saturday 20 October, 2018
Mr BulletFeeder is GREAT! I just recently added another Dillon 1050 to my bench, and I have Mr. BulletFeeder on my other pistol setups so I had already planned to do the same to the new loader. Really does a great job, and allows me to concentrate on other functions rather than place individual bullets. Therefore, I believe that while the bullet feeder is not a total necessity, it certainly helps me to make more consistent ammo with less issues during a reloading session. And, the MR BF certainly speeds up the operation by a sizeable margin. Nice work DAA and MR BF! Keep it up.
Sunday 07 October, 2018
A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
Friday 14 September, 2018
I added the Mr. Bulletfeeder to my Super 1050 and it has made reloading fun.
I reload 223 ammo and being someone with big fingers, trying to place the small bullets onto the case was very aggravating.
The Mr. Bulletfeeeder has resolved that issue and reloading is now fun and very fast.
Thank you for such an outstanding product!
Thursday 09 August, 2018
Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
Monday 07 May, 2018
I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE REPLACING THE 9MM BULLET FEEDER WITH A NEW MR. BULLET FEEDER AND JUST JUNKING THE OTHER UNIT.
MARTIN G SCHANER
Wednesday 11 April, 2018
Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over.
Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube.
I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.
Friday 06 April, 2018
I bought a Mr BulletFeeder for my XL 650, to load 9mm for USPSA shooting. Once you finish fine tuning everything, it's an awesome addition. With the bullet feeder, my reloading has been considerably sped up. 10/10 would buy again. Make sure to read the directions, and take your time to get everything adjusted. Be prepared to fine tune it a bit.
Wednesday 27 December, 2017
perfect gift to my self :-) easy to install and good youtube clips when trobleshooting/install
Wonder why i did not buy it when i bought my 650. Worth the money :-)
Saturday 07 October, 2017
Great Product. Easy to install and really met all my expectations. Wish I would have purchased years ago. The videos you have posted are excellent. Thank you.
Friday 28 April, 2017
I purchased the Mr.Bullet in 9mm directly from DAA and it worked so well I've purchased conversions in .40 S&W and .45acp. Extremely easy to set up and saves valuable time that I use for more shooting. I highly recommend the DAA Mr. Bullet bullet feeder.
Larry T Burkett
Friday 31 March, 2017
I recently purchased the Mr. Bulletfeeder and now I am wondering why I did not do this YEARS ago. Hands down the best investment you can make if you are a competitive shooter....TMBF takes the chore out of a quick 200-300 round reloading session, you can be done in minutes and then off to the range. I highly recommend a TMBF. As a side note when my BF arrived the collator plate where the bullets drop into the spring tube was broken..I called Customer service snapped a picture and one was in the mail on the next business day. Buy with confidence and you will not be disappointed in the product or CED!! Keep up the great work
Monday 27 March, 2017
Mr. Bulletfeeder turned out a great product.
make purchases on your site is a pleasure, also shipping times are really reduced.
Wednesday 01 March, 2017
I purchased the 5.56mm on Dillon Precisions website, it's the best addition to speed since the addition of a case Feeder. The quality is far superior to to other Feeder systems on the market. I have a Hornady kit in 9mm and 45 ACP they are garbage compared to the MBF. I plan to add the Caliber Conversion Kits for 9mm and 45 as soon as possible.
This system is money well spent.
Monday 27 February, 2017
Very good product, I'm quite the novice took a little time to get just right. The custom powder funnel/expander wasn't marked like said in video. Will be contacting them. Very good product highly recommend.
Wednesday 04 January, 2017
I bought this for a Dillon 650 XL and it works just as advertised. I took my time and set it up prior to any immediate loading so that I didn't have any pressure on myself. Once I had it feeding appropriately and without hesitation, I went into production. What a great machine! No problems, smooth and very efficient. I sometimes dumped a few too many bullets in the hopper and it didn't even notice or slow. Just efficient and accurate. Thanks once again for an extremely well-engineered piece of equipment.
Monday 27 June, 2016
Je me suis procurer un excellent complment à ma Dillon Xl650.
juste un peu de difficultés d'ajustement du panier de collection pour le nettre à 45 degré.
De l'argent bien investi.
JEAN PIERRE LABONBTÉ
Tuesday 21 June, 2016
Der beste Bulletfeeder auf dem Markt - sobald das Gerät eingestellt ist, läuft es wie am Schnürchen. Die Geschosse werden zuverlässig zugeführt, die Geschwindigkeit ist regelbar und somit auf das eigene Arbeitstempo sehr gut einstellbar.
Der Kaliberwechsel geht schnell von der Hand, die Verarbeitung ist sehr solide. Sollte einmal ein Teil kaputt werden, so ist es kein Problem die Teile nachzubestellen und auszutauschen. Ein weiterer Vorteil ist, dass man im Gegensatz zu den anderen Bulletfeedern eine relativ große Menge an Geschossen einfüllen kann - ohne eine Störung hervorzurufen.
Angesichts der Vorteile und der wirklich guten Verarbeitung ist auch der höhere Preis gerechtfertigt und zahlt sich allemal aus.
Martin J. Ivancsics
Monday 13 June, 2016
Purchased a Mr. Bulletfeeder in 9 m/m and conversion kits for .40 and .45. Set-up was very easy thanks to the included set-up instructions and the online videos. I do not know why I waited so long to get this.
I am using this on a 650 with a case feeder.
Seats the bullet, eliminating any powder slinging.
Bullets seated true and square.
No more shaved lead or copper (from copper plated bullets)
No more crumpled cases while seating.
None that I have encountered.
If you are considering a bulletfeeder, look no further than the Mr. Bulletfeeder. About the only thing that comes close to this is a good Belgium beer!