Wednesday 27 May, 2020
Spendy, but very much worth the expense. This is a well designed, well built product that lives up to your expectations. My only suggestion would be to have an on/off toggle that is separate from the variable speed knob. A guy could add that on “in-line” easily enough, so it’s not a big gripe, but worth mentioning. All in all, DAA makes Well designed products that rival the quality of the best built loaders available.
Thursday 07 May, 2020
I’m very pleased with this machine, one thing I noticed is the dropper could be a little heavier so I didn’t have to use a rubber band to pull it back down every time and the powder flare could be better by polishing it. Other than that, my Dillon 750 is pretty awesome with this unit added to it.
Saturday 25 April, 2020
I had to build my own custom ramp out of a metal wire, but now the Mr. Bullet Feeder works like a charm in flipping over my longer boat tail bullets. Works great!
Tuesday 21 April, 2020
I purchased the 9mm Mr Bullet feeder. And I can’t say enough good things about it.
Very well constructed. And I was surprised to find out. I didn’t need to adjust anything but the depth of the dropper assembly. (for my Precision Delta 124g hollow points)
My only complaint was that the threads for the aluminum dropper assembly are machined slightly oversized. Making the die very tight and impossible to turn the preinstalled lock ring or the die body into my RL1100 toolhead by hand.
I wound up with a few scratches on the knurling of the die. But a quick touch up with a sharpie and it was good to go.
That one hiccup aside. The dropper runs flawlessly, and I would absolutely recommend it to anyone interested.
Tuesday 18 February, 2020
I thought I should point out that I solved the MBF with the powder cop on the Dillon XL750. I had an old RCBS uniflow powder drop and I had an RCBS Case activated system to work the uniflow. I put it together, put the powder cop in statrion 3 and the MBF in station 4 and there you go. Works like a charm.
Monday 30 December, 2019
Received complete order promptly with no issues. Installation was simple and straight forward. Very happy with the ease and production improvement. Should have mad the move sooner.
Saturday 21 December, 2019
I shoulda bought one years ago - the reloading flow is assume!
Friday 20 December, 2019
Mr. Bulletfeeder provides a real confort for reloading. I am very satisfied with my purchase.
Monday 16 December, 2019
There's one thing which usually isn't mentioned in these reviews. The fact that the bullet feeder makes reloading safer by freeing up your attention to look at what's going on in all the stations instead of having your focus monopolized by putting the small bullet into the small hole in your case so you can pull the handle again. The quality of my ammo has improved since I started using the bullet feeder.
Tuesday 23 July, 2019
Wish I bought this earlier, works fantastically! I was afraid that the bullets would not be seated firmly enough for the shell-late to rotate without the bullets staying seated but it works beautifully thanks to the custom expander that is included in the package.
Friday 12 July, 2019
Love mine. Speeds up reloading process a lot and helps with powder spill on my 9 major loads. Once in awhile you get a flipped bullet but so far it’s been quite reliable. Setup does take a little bit of time but after it’s done you’ll be happy you bought one
Wednesday 08 May, 2019
Great product! well made and reliable. A great choice for the money, absolutely satisfied!
Tuesday 19 March, 2019
As I load a good 20k 45 a year, I really wanted to like it. Tried to get it to work for over a year. Was back and forth with customer service dozens of times, but regardless of what they say, this just does not work with a lot of lswc profile bullets. I, and a number of other bullseye shooters I have spoken with, have never been able to get it to work even though I was assured it would work before ordering it. I was forced to sell it. In the end I lost over 100$ and a ton of time on this. Not happy.
Monday 11 February, 2019
Struggling with the powder funnel/case opener provided. It was quite rough and causes the machine to shake when pulling it out of the case. I honed it with 1200grit paper and it got better but still sticky causing powder to spill. Will just have to load a couple of thousand and see if it gets smoother.
Saturday 20 October, 2018
Mr BulletFeeder is GREAT! I just recently added another Dillon 1050 to my bench, and I have Mr. BulletFeeder on my other pistol setups so I had already planned to do the same to the new loader. Really does a great job, and allows me to concentrate on other functions rather than place individual bullets. Therefore, I believe that while the bullet feeder is not a total necessity, it certainly helps me to make more consistent ammo with less issues during a reloading session. And, the MR BF certainly speeds up the operation by a sizeable margin. Nice work DAA and MR BF! Keep it up.
Sunday 07 October, 2018
A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
Friday 14 September, 2018
I added the Mr. Bulletfeeder to my Super 1050 and it has made reloading fun.
I reload 223 ammo and being someone with big fingers, trying to place the small bullets onto the case was very aggravating.
The Mr. Bulletfeeeder has resolved that issue and reloading is now fun and very fast.
Thank you for such an outstanding product!
Thursday 09 August, 2018
Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
Monday 07 May, 2018
I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE REPLACING THE 9MM BULLET FEEDER WITH A NEW MR. BULLET FEEDER AND JUST JUNKING THE OTHER UNIT.
MARTIN G SCHANER
Wednesday 11 April, 2018
Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over.
Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube.
I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.