In stock
$519.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options
We Also Recommend
$39.95
$33.95
$169.95

Latest reviews

Saturday 27 November, 2010
When I ordered Mr.Bulletfeeder I´ve got this message from DDA

H Jonas,
thanks for your new order. You will love the bullet feeder!
we will send it out today
saul

The delivery was about 4 working days to Sweden and I have used Mr. Bulletfeeder for a while now. There is a good manual with...
Rating: (5 of 5 Stars!)
Saturday 06 March, 2010
Mounted it on a Dillon 1050 set up for 38SA:
works from the first minute flawless!
Absolute reliable and fast.
I expected a couple of hours for setup and then the first 1000 rounds many troubles.
But far from it:
2 hours after opening the package I've finished the first 1200 rounds without...
Rating: (5 of 5 Stars!)
Monday 02 November, 2009
Super machine +++++++++ works like a clock.
Rapid delivery to Sweden 5 working days from order to delivery.

Best regards.
Peter Jansson
Rating: (5 of 5 Stars!)
Sunday 04 October, 2009
Well, first of all I saw this bulletfeeder on YouTube. I’ve been looking for something like this for years to install on my Dillon Xl 650. I started searching and came across some other feeders like the one from GSI. When you’ve seen this one you know you’ve seen it before. But that was in a...
Rating: (4 of 5 Stars!)

Mr.Bulletfeeder by Double-Alpha - Pistol and Rifle

(104)
Manufacturers: Double-Alpha Academy
DILLON XL750 NOTE
The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. As a solution to this issue we are pleased to offer our  Extra-Short Dillon Powder Bar. (sold separately)

Description:

DAA has been the proud European distributor of Mr. Bullet Feeder since 2006. It makes one wonder how they ever reloaded without one...  Those who reload a lot, quickly appreciate the efficiency and reliability of this ingenious Patented system.

However, Mr. Bullet Feeder was always been a little “rough” in its appearance and finish.  It was made from existing materials and parts, and as such never had the sleek professional look and feel of a refined “production” article.  Additionally since the bullet feeders have always been hand made, in moderate quantities, production costs have been high, resulting in demand, which always exceeded availability.

Now, all this has changed! DAA proudly introduced the DAA Mr. Bullet Feeder in 2012.  DAA and Rak Systems teamed up in retooling and redesigning the Mr. Bullet Feeder, with fantastic results.  The  Mr. Bullet Feeder by DAA, manufactured by Double-Alpha Academy under license by Rak Systems, is a professional, hi-tech version of the original.  It is lighter in weight and more compact than the previous models.  This new streamlined product is easier to install and set up, while retaining the same flawless performance and efficiency of the original design.

In fact, an entirely new US Patent Pending dropper system allows this new model to function even better and longer than before. The new dropper design eliminates the need for any spring or small plastic parts in the dropper head, and allows it to function entirely by gravity and an ingenious geometric design.

Finally to top it all off - DAA offers the DAA Mr. Bullet Feeder at a far more affordable price!

If you have never tried a bullet feeder on your progressive reloader – don’t wait any longer!  It will cut the time and effort involved in reloading practically in half!  A must-have item for any serious shooter.

The new Mr. Bullet Feederby DAA is available in 9/38, 40SW/10 mm, .45, and in rifle calibers .223, .308, and 6.5x55mm. (See rifle calibers under other listing).

US Patents: US 7,497,155 B2 and US 8,661,959 B2

Click here for user instructions for this and other products.

Reviews (104)

Saturday 27 November, 2010
When I ordered Mr.Bulletfeeder I´ve got this message from DDA

H Jonas,
thanks for your new order. You will love the bullet feeder!
we will send it out today
saul

The delivery was about 4 working days to Sweden and I have used Mr. Bulletfeeder for a while now. There is a good manual with the delivery and yes I´m sorry but it was to much money to not read the manual before installation ;-). I must say... it is true I really love Mr.Bulletfeeder. It makes reloading so much nicer...

If you load a lot buy one your self you will not regret it.
Best Regards
Jonas
Saturday 06 March, 2010
Mounted it on a Dillon 1050 set up for 38SA:
works from the first minute flawless!
Absolute reliable and fast.
I expected a couple of hours for setup and then the first 1000 rounds many troubles.
But far from it:
2 hours after opening the package I've finished the first 1200 rounds without any trouble! Great!
Monday 02 November, 2009
Super machine +++++++++ works like a clock.
Rapid delivery to Sweden 5 working days from order to delivery.

Best regards.
Peter Jansson
Sunday 04 October, 2009
Well, first of all I saw this bulletfeeder on YouTube. I’ve been looking for something like this for years to install on my Dillon Xl 650. I started searching and came across some other feeders like the one from GSI. When you’ve seen this one you know you’ve seen it before. But that was in a Spielberg movie, “Close Encounters Of The Third Kind” or something like it… So not what I was looking for and besides this is not why I bought a Dillon press. It needed to be flexible and affordable. So I stumbled on the Mr. Bulletfeeder.
When I received the shipment I could not help the feeling that I just had financed a high school science project. It looked like it could work, sure! but it was not there yet with the looks. The sewage pipes didn’t help that thought at all. Was this a more advanced prototype of a toilet or what?
But when I started to install the collator it seemed like they’ve thought things through. To my surprise they also made some nice improvements in comparison to the versions you see on YT. I made myself a bracket, which should have been included in the first place, and got rid of the sewage pipes. Mounted the collator on it and was ready to roll. And it is true the science project works. IT’S ALIVE!!! The only problem I see is that sometimes the bullet is not seated straight up. I’m hoping a Redding Competition seating die is going to correct this problem.

Things to consider next time:
When these guys supply a 220V adapter for Europe they should include some adapters to plug it into our European wall sockets!

I also hope that there will be a spare parts list available soon.
Setup

Q: Is it necessary to use the powder funnel/expander that came with the system?

We recommend installing the new powder funnel/expander (for handgun calibers) on your press. It has been machined with a modified profile...

Mr. Bulletfeeder Video Tutorials

Meet Saul Kirsch of Double-Alpha Academy and Rick Koskela, the original inventor of the Mr. Bulletfeeder by Double-Alpha. The two will introduce the new system to you, and show you how to set up you bullet feeder.

 

Saul...

Adjustment

Q: When mounting the collator, what is the best angle to use?

For the majority of bullet types, a collator plate angle of 45 degrees will provide excellent results. When the surface of the plate is set to and angle of 45...

Rifle Caliber

Rifle 6.5x55mm video tutorials







 

 

223/5.56 Setup Information

Collator
The bullet collator...

Troubleshooting

Q: I installed my Bulletfeeder 7 months ago and have been very pleased with it. The last time I used it was about three weeks ago and when I turned it on just now nothing happened. No motor noise at all. I checked all the fittings and...

General questions

Q: I would like to use a mr bullet feeder for 9mm and 223 on my Dillon 650. Do I need to buy two separate units (one for pistol and one for rifle) or can I use one unit and a conversion kit?

All you need is a Mr.BF...

Also Available In Set(s)

You may also be interested in