In stock
113.64
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options
We Also Recommend
€42.73
€43.18 €38.86

Latest reviews

Wednesday 08 January, 2014
What a fantastic simple little device. For once I followed instructions and setup case flare as instructed. This little gadget works a treat on my XL650, just crank the handle and watch the projectiles drop into place. Get a few spare projectile tube assemblies to fill up whilst watching TV then...
Rating: (5 of 5 Stars!)
Thursday 12 September, 2013
I am reloading 9mm and 38super on a hornady l&l progressive press. I don't have a case feeder so I have to place an empty case with my left hand every cycle. To place a bullet i had to take my right hand of the press lever and place the bullet. Now with the bullet feeder i can keep my hand...
Rating: (5 of 5 Stars!)
Friday 09 August, 2013
Hi, I got my "Mr. Mini" this morning. Unpack and after 30 minutes up and running... flawless! Great product for a fair price TIP: Like in the manual is written, clear out the press of all its powder, primers and cases before starting to install…. You need to adjust and make a number of tests...
Rating: (5 of 5 Stars!)

Mini Mr.Bulletfeeder by DAA - Pistol

(63)
Manufacturers: Double-Alpha Academy

Description:

Please note:

The current design of the new XL750 does not allow the bullet dropper to be positioned in station #4 of the toolhead because of the angle at which the powder Dispenser bar extends directly towards it. This means the bullet dropper MUST be positioned immediately after the powder dropper, in station #3. That makes it impossible to use a Powder-Check AND a bullet dropper at the same time.

We will attempt to come up with a solution to allow the powder dropper to be rotated to another angle to resolve this issue, but at the moment, be aware of this issue.

The Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder.

Using a Mr.Bulletfeeder while reloading is a real pleasure. It makes the reloading process faster and much easier. If you have never used one, you are missing out on one of the greatest reloading assists out there! A Bulletfeeder also improves safety, by preventing the need to insert your fingers under the tool head to place your bullets on the brass. Everyone should use one!

The problem of course, is cost. Shooting is expensive, and reloading ammo, while usually cheaper than shooting factory, is not as cheap as it once was…
You need to buy a press, other reloading accessories, not to mention ammo components. For many, by the time all that is purchased, they have stretched their budget about as far as it will go. And the Bulletfeeder gets passed on, for lack of funds.

This was our motivation when setting out to develop a less expensive version of the Mr.Bulletfeeder, and it lead to the new Mini Mr.Bulletfeeder.

Each magazine of bullet tubes needs to be filled by hand before reloading, much in the same way you would fill your primer tubes before starting your reloading session. With a little practice, it will take you about 2 minutes to fill the tube assembly. And this can be done in advance while watching TV in the comfort of your living room. Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting your reloading session.

While reloading, you will see the bullets drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue without delay.

The Mini Mr.Bulletfeeder can be used on any progressive reloading machine which uses the same size dies as Dillon, however please note that the powder funnel we supply with the unit is designed to be used only in the Dillon powder drop! If you wish to use the Mini Mr.Bulletfeeder with another press, you may need to get another powder funnel to expand the brass.
Be aware that the bullet feeder does require a station in your tool head, directly after the powder dropper.

We have found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to do with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050.

Your Mini Mr.Bulletfeeder by DAA includes:
1 x 6-Tube Bullet Magazine Assembly
1 x Dropper Die Assembly
1 x Expanding powder funnel (Dillon compatible)
3 x Spare Steel Ball-Bearings for Dropper
1 x User Instruction Sheet

Please note: Mr.Bullet feeders and Mini Mr.BF are usually shipped with our Dillon Powder funnel. If you wish us to swap that out for a Hornady funnel when shipping – we can do so for you. request that at time of ordering. Or, separately purchase your Hornday expanding powder funnel here

Click here for user instructions for this and other products.

Reviews (63)

Wednesday 08 January, 2014
What a fantastic simple little device. For once I followed instructions and setup case flare as instructed. This little gadget works a treat on my XL650, just crank the handle and watch the projectiles drop into place. Get a few spare projectile tube assemblies to fill up whilst watching TV then you're set to rocket through the next reloading session.
Thursday 12 September, 2013
I am reloading 9mm and 38super on a hornady l&l progressive press. I don't have a case feeder so I have to place an empty case with my left hand every cycle. To place a bullet i had to take my right hand of the press lever and place the bullet. Now with the bullet feeder i can keep my hand on the lever and keep reloading as fast as i can place an empty shell case. This speeds up the reloading considerably. So far i had no problems and everything works as advertised.
Friday 09 August, 2013
Hi, I got my "Mr. Mini" this morning. Unpack and after 30 minutes up and running... flawless! Great product for a fair price TIP: Like in the manual is written, clear out the press of all its powder, primers and cases before starting to install…. You need to adjust and make a number of tests to be sure all is working well. Pro's: - As always quick delivery (1day after ordering) - Easy to setup, not too difficult if you already are known with Dillon machines. - It is indeed a step less in handling and significantly speeds up the reloading process. - When correct setup, 99,9% feeding a bullet. Cons: - The clamp to "free" the tube is not the best design. Difficult to grab, you will lose it quickly, so a small chain to keep it with the tubes would be nicer, like 2 or 3 spares. - Easy to forget the clamp before reloading. First time al bullets fell on the floor when picking up the just loaded tubes. - With a powder check installed on a XL650 it is difficult to see if a tube is empty. - Price-performance of the product is a max. Overall : Absolute MUST to have for the serious reloader!
General questions

Q: Will the mini Mr. Bullet Feeder work with lead cast, polymer coated bullets? Specifically .40 cal. (.401 diameter)?

Yes, as long as they are not full wadcutters.

Q: I would like to know if your mini...

Also Available In Set(s)

You may also be interested in