Saturday 05 September, 2020
The conversion kit is well built, the only issue I have with it may be related to the caliber of bullet that I am using. It does not appear to flip my 300 blk bullets all the time, and when it doesn't they either fall out of the front the feeder or get caught up under the plate.
[DAA reply]: Please refer to the following page for setup instructions: https://www.doublealpha.biz/support-mrbulletfeeder-rifle-caliber
Wednesday 08 July, 2020
I can’t believe I had (3) 22cal. 55 gr boat tails go in upside down. All Of u know that they are one of the toughest to feed consistently due to being short and basically pointed on both ends. This all happened during the loading of 3000 rnds. Quite impressive! U also know that people only read the one star reviews???? I would have given it a 5 but u wouldn’t have read this review of this amazing piece of machinery.
Sunday 17 May, 2020
I purchase the 9mm /38 conversion kit for my Dillon 1050, It works excellent.DAA Has fantastic customer service,Josh help me out . 5 stars all the way!!!!
Saturday 02 May, 2020
Eigentlich alles Bestens
Dieses ist die erste Version als Langwaffensetzer beim mir von dem System. Leider bekomme ich das Klemmverhalten des Geschosses, wie bei den Kurzwaffen Geschosse nicht so hin. Ist vielleicht Übungssache.
Sonst gerne zum Kauf zu empfehlen, immer wieder.
Albin Marco Tremain
Wednesday 01 April, 2020
Picked up MBF last summer and cranked out a ton of ammo over the last year. This conversion helped me even more. purchased in 223. no more hand cramping. Thumbs up
Thursday 22 August, 2019
quality is excellant, quick service. will continus to support this company
Tuesday 13 August, 2019
I have been loading 9 mm for two years I purchased the Mister bullet feeder. It has worked flawlessly and I have made thousands of rounds. Needless to say we've practiced 3 to 4 times a week. This conversion kit what's to make 45 ACP two years experience thumbs up, I have no regret purchasing this product. Quality stuff..
Thursday 04 July, 2019
I currently have 45 and 9mm/38conversions will be adding a few more. Obviously a Must have. I do wish the *Viewing TUBE was a bit longer (since occasionally one is in there upside down requiring a tweaking of the adjustments). I do NOT like to have to disassemble the goofy rounds that get seated because I am not paying close enough attention.. so IF there is a way to get a LONGER View Tube that would be awesome people. Thanks in advance it's my only **complaint. Besides that; this is a WONDERFUL addition to my Mark7 AutoDrive Dillon P 650XL
Tuesday 16 April, 2019
I have several caliber conversions of the MR.Bulletfeeder. With normal lenght and longer bullets it works just fine. Just get the angle correct (45 degrees, don't eyeball it, measure it! :)) and it works flawlessly most of time with all sorts of bullets.
If you plan to use it with short bullets like 9mm/.38spl 90gr or 45 Colt 160gr, where the bullet is shorter than the height of the collator plate, you need to modiifie the dropper funnel (top plastic part of the springtube) as the bullets most likely will tumble down and get stuck in the funnel. I just took a piece of a plastic PET bootle and with a heatgun made a drop-in funnel with half the width in the opening and a bit narrower to stop the bullets tumbling.
Friday 15 February, 2019
I absolutely LOVE the Mr Bullet Feeder! I purchased a unit and got a caliber conversion for 223 and then bought the 308 conversion. The only issue i am having, is with my 308. It will not drop .310 diameter bullets through the dropper assembly for 300 BLK subs. I don’t know why the tolerances are that tight? But all in all, I am happy.
Thursday 03 January, 2019
Great product and so easy to use . I'm so glad that I was able to find it on line.
Sunday 07 October, 2018
Can be set up in minutes, easy to use. Save a lot time during reloading.
Tuesday 17 April, 2018
Excellent service from CEDHK. Mr. Bullet feeder also works great.
Sunday 31 December, 2017
Is an essential accessory for anyone who wants to by a real reloader!!!
Sunday 09 July, 2017
I have purchased a number of items from Mr. Bulletfeeder which always arrived promptly. I actually enjoy watching the system do its thing - almost a ballet
Sunday 25 June, 2017
I purchased .223 rifle, 9mm and .45 acp Mr Bullet feeders, as well as, a Inline Fabrication lighting kit for my Dillon xl 650. I have carpal tunnel syndrome in both my wrists and loading bullets by hand was very painful. This bullet feeder has made loading a joy again! Wow, the Mr Bulletfeeder is incredible and works as advertised. The lighting system is perfect for light right where you need it. I recommend these products to anyone who no longer want to place bullets by hand and come out of the darkness on your press...
Friday 25 November, 2016
223 conversion worked very well in my 9x19 Mr. Bulletfeeder.
Sunday 04 September, 2016
Very FAST shipping and wonderful customer service! Will be purchasing a rifle conversion kit very soon.
Wednesday 10 August, 2016
I purchased the 5.56 bullet feeder and the 9mm and 45acp. The feeder setup in just a few minutes and had it running. It runs perfect, couldn't be any better. I haven't run the 9mm or the 45acp yet, but if it does run as good as the 5.56 it would be the best thing I have found to speed up the reloading process. If wish I had gotten the bullet feeder years ago. I would recommend this for anyone who has a Dillion progressive loader.
Thursday 19 May, 2016
I really like the Bullet Feeder. I have 9mm and purchased the .45 conversion. The Bullet Feeder relaibly feeds, and speeds up the reloading process with my Dillon 650 progressive press. Compared to others the price is reasonable, and when prorated over years of service it is a worth while investment.