This product is not currently available from our North American Warehouse.
The Free Float lock Ring is made of 6061 top quality aluminum and anodized black. It includes a lock up screw and hex key.
The ring is locked onto the die’s threaded body slightly above the toolhead surface – and the through hole in the ring is positioned above the threaded hole on the Armanov toolhead (650 or 550) allowing the die to be locked in place, not able to rotate, while remaining free floating.
How does that work?
Well – rather than locking the die down to the toolhead, as you would usually do with a regular lock-up nut, this system allows the die to float freely, because the Free Float lock ring is not tightened against the toolhead itself, but rather it is locked onto the die body only – and a thin screw threaded through a hole in the ring prevents it from rotating. This way, you are able to keep the die from turning and loosing its settings, but at the same time allow it the play it has in its threaded toolhead, which makes it “Free Floating”. This allows the die to align itself better with each cartridge, for the best possible alignment and concentric ammunition. This helps to improve the reliability and the accuracy of your reloaded ammunition.
Free Float Lock Ring for Dillon Toolhead
2908 Betz Court, Orefield, PA 18069
Fax: (610) 366-9680