Product Reviews

I have always been an RCBS and Hornady machine user, just what I started with and have gotten comfortable. As such I didn't often venture too far from RCBS, LEE, Hornady or Redding for my dies and accessories. After spending $200 on failed bullet feeders from RCBS and Hornady I stumbled on Mr Bullet in a Dillon thread and boy am I glad that I did. I now have all four or my progressive presses setup running Mr Bullet and it NEVER fails. The worst that will happen is a double drop and a simply raise of the die will resolve this for good. This can happen if you set with just a few bullets and then run a complete tube in production mode. The design is so simple but so very effective. A spring is a good add and helps it return each time. I use a 2" long x 1/8" diameter fairly week spring connected at both ends on the retainer clip stretched downward onto a short machine screw threaded into the side of an RCBS lock nut threaded onto the die above the original that locks to the die plate. Super simple, clean and does the job. Mr Bullet has an add-on that is dual spring and probably better as it would apply even pressure on the inner die tube. I especially love how I can easily switch over calibers and run the same bullet drop die especially with the 9mm, 380, 38s and 357 mag. The dies are very reasonably priced so having one for everything you do is not a problem. And you don't need a bullet tube array for everything you do just move it around as needed if you run multiple setups as I do. 100% support for Mr BulletFeeder. What a great product.

Now I can run my bullet feeder on XL750. Great bar and works very well.

Très bien sur un Shadow 2. La masse équivaut à un vrai chargeur rempli de 12 cartouches. Le fait de pouvoir actionner la culasse sans la bloquer ouverte est un plus. Très proche en manipulation d'un véritable chargeur sauf pour ce qui concerne la rétention sur un aimant : il tient mais beaucoup moins bien qu'un vrai chargeur, c'est dommage.

Excellent operation for large and small calibers...................

Works good, easier to tell the how much you actually move things

This is a great tool for serious shooters, when your spending thousands of rounds a month. You should consider to have this tool.. The product is fine i give it a 4 star, at least to reduce the time of doing 1 bullet each round plunk test. However, there are some holes i find it with variances in diameter (mm), a single bullet can pass some holes while others wont. i marked some of the holes that are too tight but can still pass the barrel drop and other gauges. The numbers aren't that much around 14 -16 holes. Not a bad purchased, the 100 gauge is still the ideal but product quality can still be improved.