In stock
24.55
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Thursday 01 June, 2017
I utilized the die on a 650 Dillon press, so that I can utilized the powder check alarm with the Mr. Bullet accessory. It adjusted fairly easy, but not as consistent with the Dillon dies. I decided to go back to the Dillon die as the crimp was consistent. It did perform as advertised. Would I...
Rating: (4 of 5 Stars!)
Tuesday 28 February, 2017
Nice die. Used on Dillon 650. Takes some adjustment but works great once dialed in. Enables use of bullet feeder in station 4 while maintaining my powder check in station 3.
Rating: (5 of 5 Stars!)
Thursday 18 August, 2016
If you own a 550, then you MUST HAVE this Mini Bullet Feeder and the DAA 2in1 die. So easy to install and its very easy to use Highly Recommended!
Rating: (5 of 5 Stars!)
Tuesday 29 March, 2016
Very good and easy to use. I use it on my 550 to clear one space for a bullet feeder :-) It is a bit different then the dillon dies, but absolutely good quality and easy to use. I have consistent bullets and small adjustments in the OAL of the bullet is easy to do without altering the crimp.
Rating: (5 of 5 Stars!)
Friday 25 March, 2016
I use a 550 with a Mr. Bullet Feeder and I have found that this 2-in-1 die is the best solution to having to seat and crimp on one station. Best of all it's reasonably priced. Once it is set it doesn't change! If you're stuck with a 550 with caseloader and you want to eventually get the 1050 one...
Rating: (5 of 5 Stars!)

DAA 2-in-1 Seating and Crimping Die

(25)
Manufacturers: Double-Alpha Academy

Description:

We sell a lot of Bullet Feeders. And the most common request we hear is “Can I used the Bullet Feeder on my 550?” Or “can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

The answer to both questions is, YES, provided you combine your Seating and Crimping operations into one station, to free up the station your Bullet Feeder will need.

Such Seating and Crimping dies are available, and so we decided it was timer we made them directly available to our customers as well. We teamed up with one of the best Die manufacturers, LEE Precision, and are now pleased to offer you our DAA 2-in-1 Seating and crimping dies.

These quality stainless steel dies, enable you to Seat and Crimp in one station, without compromising the quality of your ammo. It may take a little longer to get the adjustments just right, but once calibrated correctly, this die will produce consistent and precise quality ammunition.

These dies include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet Seater, are heat treated to ideal hardness and polished to the smoothest finish.

 

DAA 2-in-1 Seating & Crimping die – Set up Instructions
Thank you for choosing this DAA 2-in-1 Seating & Crimping die. This die frees up a station in your progressive-press tool head, making space for a bullet dropper die on your 550, or, allows you to use a bullet dropper along side a powder-check on your 650 or 1050.

Follow these steps to adjust the Die:

  1. Position a well-sized and belled case in the appropriate station and run the tool head all the way down (or shell plate all the way up)
  2. With the adjustment knob and lock ring on the die adjusted as high as they will go turn the die into the tool head until it stops, when the top of the case makes contact with the crimp shoulder.
  3. Set the lock ring by turning it down until it locks against the top of the toolhead.
  4. Turn the adjustment knob 2 full turns down, then lower the shell plate and place a bullet onto the case.
  5. Keep turning the adjustment knob down, and test the length of the bullet until you get the overall length you are aiming for.
  6. Once the correct length is reached, lower the shell plate, and loosen the lock ring. Then, turn the die down another half turn to create an adequate crimp, and retighten the lock ring. Then turn the adjustment knob about 2 turns out.
  7. Raise the shell plate again and bring the bullet back into the die, then turn the adjustment knob down until it makes contact with the top of the bullet.

Now the die is properly set for both depth and crimp, which occur at the same time at the top of the stroke.

 

 

Reviews (25)

Thursday 01 June, 2017
I utilized the die on a 650 Dillon press, so that I can utilized the powder check alarm with the Mr. Bullet accessory. It adjusted fairly easy, but not as consistent with the Dillon dies. I decided to go back to the Dillon die as the crimp was consistent. It did perform as advertised. Would I recommend this? Yes, if you plan on using a powder check alarm with Mr. Bullet on a Dillon 650 press.
Tuesday 28 February, 2017
Nice die. Used on Dillon 650. Takes some adjustment but works great once dialed in. Enables use of bullet feeder in station 4 while maintaining my powder check in station 3.
Thursday 18 August, 2016
If you own a 550, then you MUST HAVE this Mini Bullet Feeder and the DAA 2in1 die. So easy to install and its very easy to use Highly Recommended!
Tuesday 29 March, 2016
Very good and easy to use. I use it on my 550 to clear one space for a bullet feeder :-) It is a bit different then the dillon dies, but absolutely good quality and easy to use. I have consistent bullets and small adjustments in the OAL of the bullet is easy to do without altering the crimp.
Friday 25 March, 2016
I use a 550 with a Mr. Bullet Feeder and I have found that this 2-in-1 die is the best solution to having to seat and crimp on one station. Best of all it's reasonably priced. Once it is set it doesn't change! If you're stuck with a 550 with caseloader and you want to eventually get the 1050 one day like I do, then consider a Mr. Bullet Feeder and this die and make the next logical step happen. You won't regret it. I shoot moly-coated bullets in 40 and have had zero issues.

Also Available In Set(s)