Tuesday 15 December, 2020
More gradual taper than Dillon. Worked better for me on 9MM & .38.
Wednesday 02 December, 2020
Great product for any shooter wanting to load large quantities of ammunition.
Sunday 08 November, 2020
These powder funnels are a must for coated bullets. After having 10-12 no drop test pieces per 100 with a generous flare (0.020 over). I switched to the stepped powder funnel. The lead shaving was eliminated with less flare. The no drops per 100 was less than 2 and those still chamber. What I found was the bullets would tip sideways going up into the seating die. Causing case deformation which cause most of my problems. PLEASE MAKE MORE SIZES 458 AND 30 CAL BULLETS NEED THESE TOO.
Wednesday 16 September, 2020
Bells the case mouth perfectly but sticks in the case causing an annoying “thump” and powder spillage on retraction. I tried lubed and non-lubed cases. I even tried lubing the powder funnel.
Thursday 30 April, 2020
Sembra fatto molto bene, da un’idea di solidità nel tempo !!
Tuesday 24 March, 2020
Love the way this funnel works,,,So well in fact that I ordered the Mini bullet feeder to go with it..
Wednesday 19 February, 2020
Works great with powder drop . No problems with brass sticking to funnel. I find myself using your site to purchase Dillon products.
Tuesday 28 January, 2020
The funnel works great it seats the bullet in place, didn’t have a bullet not seated properly before seating the bullet. I would have given it a 5 star but because every time it goes up to flare the case and powder on the way down the brass is sticking to the funnel and spill sone of the powder. I lube my bass before it goes in the case feeder even tried lubing the mouth but still sticks. Lots of powder spill loading 9major.
Tuesday 31 December, 2019
Works as advertised, holds the bullet straight for the next step in the process.
Friday 20 December, 2019
very useful product for inserting the ball into the cases more quickly and straight
Saturday 16 November, 2019
The Mr.BulletFeeder Powder funnel for the Dillon press is perfect for properly expanding a case mouth so that the bullet fits perfectly straight and securely; without belling or overworking the brass. You do not need to have a Mr. BulletFeeder to enjoy the benefits. Highly recommend.
Wednesday 23 October, 2019
excellant product, makes loading a breeze bullets fit consistantly
Thursday 22 August, 2019
I found out about your product thru a forum I visit. The person said your powder funnels solved his problem with seating and O.A.L. I was impressed by his comments and ordered three of them for my three presses. They are fantastic, I think Dillon should use your product in their new presses as standard equipment!!!!
Sunday 18 November, 2018
I like everything about the Dillon dies except for the powder thru die. The .40 and .45 just add too much flair or don't add enough. The 2 step DAA is perfect. The casing has a step for bullet to sit squarely in the mouth and it gives a perfect amount of expansion and NO flare. A must have for 9mm, 40 and 45. I now just need the 9mm and I am good to go. These are perfect for the bullet to stay in the case with auto feed and indexing.A must have!!!
Friday 18 May, 2018
Ordered the Double Alpha .40 caliber powder funnel for my .40 S&W cast lead bullets and am tickled with the fact that after rim expansion when my cast bullets drop from my Hornady Bullet Feed Die they drop perfectly straight and seat deep within the case mouth. If an occasional leaning bullet on the case mouth occurs it is not due to the funnel flare but to due the bullet feeder release while dropping the bullet. Couldn't be happier. LHB
Sunday 13 May, 2018
I bought this to expand for cast bullets. Works great! Use it for 9mm and 357 and couldn't be happier.
Wednesday 07 February, 2018
Excelent product. Thanks DoubleAlpha for your speed order send!
Wednesday 03 January, 2018
It works better than the Dillon but it did not go deep enough for my use. Sometimes the bullet falls off
Right before it bells the case the funnel is enlarged. But the enlarged portion was not deep enough. I will
put it in a lathe and extend the .358 portion of the expander another 5 or 10,000ths.
Wednesday 27 December, 2017
Funnel put just the right bell so the bullet drop right in without tipping on rotation. Its a must have with the Mr. Bulletfeeder. The Original do not work as good.
Monday 17 July, 2017
This funnel is one off the best products you can buy for your Dillon press. The bullets stay on the case no matter how fast I run the press, just make sure you use case lube so to reduce cases sticking to funnel.