Race Master Holster (Magnetic)
US Patent No. 8720754.
All Race Master Holsters now ship in the Magnetic version only.
Since its introduction in 2010, the Race Master Holster has established itself as one of the leading holsters on the competition circuit. It is the choice of many of the current champions in our sport, who choose it over other holsters for its unique features and outstanding performance.
The Race Master holster’s hanger and body are made completely from machined aluminum, providing a solid and rigid platform, which locks up securely in the chosen position and keeps your pistol secure and stable. The vertical rod and ball joint create an endless range of adjustment possibilities, allowing each shooter to set the holster to best suite his body type, draw style and preference. With the Race Master holster you don’t need to adjust your draw to the holster, it adjusts to you!
Unlike other holsters, the Race Master is designed to give you access to almost all the adjustment screws while you are wearing it on your belt. Without removing your belt, you can adjust the height of the gun and the distance from your body, and even unlock the ball-socket hinge and adjust any angle of the holster. This is a huge advantage in setting up your holster just right.
Thanks to the patented magnetic locking mechanism, the Race Master Holster offers you a secure lock/unlock safety lever as well as a responsive “click feeling” when the gun is seated. The magnetic slide lock assures the locking tooth is lifted all the way to the top of its range, allowing for easy reholstering.
The spring-loaded lock/unlock safety lever is conveniently positioned just below the trigger guard, enabling you to release the lock with an upward flick of your finger as you close your hand around the gun. The spring-loaded lever immediately snaps into place, either locked or unlocked, ensuring secure positioning.
Advanced Belt Attachment
The Race Master belt-hanger is sleek and modern, showing off the pattern and color of your shooting belt. But it is designed for more than looks alone.
The hanger is attached to the belt by means of two spring-steel flat clasps that are screw-tightened on the inside of the shooting belt. This design prevents any separation between the inner and outer belts, ensuring that the Velcro layers firmly hold together at this crucial point. The range of tightening provided by the four screws guarantees that you can tighten and lock the holster rock steady on any 1.5 inch shooting belt. This design allows you to assemble your holster on your belt at the designated position without struggling to slide a tight-fitting belt-hanger the length of your belt. The lack of any bulk on the inner side makes this hanger more comfortable for extended wear than any other comparable product.
While the Race Master Holster is gun-specific, it is designed to enable you to switch from one gun to another without having to buy a complete new holster. All you have to do is change the relatively inexpensive locking-block assembly, available separately. This flexibility is also a great advantage for resellers - they no longer need to stock a range of different models, as they can simply change the locking-block assembly as needed.
You can now order your holster with a personalized logo and/or name. Click Here to read more
Glock customers - read this before using your holster!
Zubehor Magazine - Review. Click here to download.>
Race Master Holster (Magnetic)
Elzenweg 33b, 5144MB, Waalwijk
Fax: +31 (0)416 392 040
Q. Will the Glock insert fit all Glock models?
Yes and no. Not trying to be evasive, but here’s the deal: The RM holster requires a very precise fit to the trigger guard of the gun. We have found that amongst the various Glock models, and sometimes even in the same model, with various generations of molds, there are slight variations in the trigger guard dimensions. Our only option was to keep the dimensions tight, to fit the smallest Glock trigger guard we could...
Q. What kinds of belts can I fit the RM holster to?
The belt holder is designed to accommodate belts up to 39mm (1.5”) wide. All belts in this category may be used. We have tried the holster on the DAA belts, CR speed, H&S and a few others. The retention plates at the back can be screwed down to grip tightly even thinner belts, so the holster can be held solidly. 2” belts cannot be used, unless you cut out a piece from the belt, narrowing it down to...
How to assemble your hoslter
The holster is designed for use on dedicated shooting belts, which are rigid and of solid construction. (DAA Competition Belts or similar).
Loosen or completely remove the four M4 round-cap screws which hold the two Belt-Hanger Retention Bars (1) in place, position the holster on your belt, and re-tighten the four screws. Do not
If your shooting belt is much narrower than 1.5”, you may need to use...
To dismantle the magnetic insert, follow these steps:
1. Remove the insert block from the holster by removing the two small M4 screws from the back of the holster
2. Using a punch and hammer, push the two steel pins from the front of the block towards the back (push from the side with the gun type engraved). These pins may be tight.
3. Once the pins are out, the plastic wedge holding the 2nd magnet will come out. Make sure the magnet does not fall...
Some shooters have experience a problem with their Race Master fit to their pistols. The following should help you resolve this:
First – check to see that the fit to the locking block is good. Remove the slide lock from within the block – and assemble the block into the holster without a slide lock. You will need to remove that long M3 screw from the back, and the slide lock will slide out upwards. Holster your gun and see that is slides in and out loosely. If not – you...
Q: I have a Sig Sauer x-six ppc with 9 mm and with a .22 barrel, as well I have a doctor mounted on the xmount, does the holster fit?
Yes to all fits, EXCEPT the X-mount insert will only be suitable for the X-Six with the X-mount installed. If you are to shoot this gun without the mount, please select an additional X5 insert.
Q: Would the Race Master fit the Tokyo Marui Hi-capa Airsoft pistol?
We do not have any insert that...
Your new Race Master Holster is constructed of several precisely machined moving parts designed to work together and fit snugly to the trigger guard of your firearm. As with your firearm itself, every effort should be made to keep the holster well maintained, clean, and dust-free. Using a dust cover over your firearm and holster is a good practice that helps keep both your gun and holster clear and clean.
Periodically and more often in dusty conditions, remove and clean the Insert...
Q. What kind of screws is used on the holster, and where can I get spares?
The screws used on the holster are all Metric, M3, M4, M5 and M6 stainless steel screws. All screws can be tightened using 3 hex keys, sizes 2.5, 3 and 4mm.
We will Shorty be offering a set of replacement screws as an accessory item, as well as hex key sets, as supplied with the holster.
Q. Is it possible to get custom logos or a name engraved on the holster body?