Write Review
Rating: (165)
10 May 2020
My first one I purchased for a RL1100 9mm setup. As mentioned in someone else's comment, the plastic insert I had needed to be sanded down a bit to get it to drop freely. Good engineering and debugging challenge but works great now. Second one I purchased for my 1050 5.56 setup because I liked this design better than the Dillon powder check. Having issues with the rod hitting the side of the case mouth and getting caught. I tapered the the rod tip more to clear the 5.56 case opening to try to solve this concentricity issue. Excellent device but may need some tweaking.
Mike Hsieh
29 Apr 2020
Fast delivery, great quality product. Easy setup, doesn’t beep, if there is no case in station and fine tuning, are big advantages of product.
Very satisfied with purchase.
Miran Vodopivec
26 Apr 2020
Once this is adjusted properly, it is a breeze to use. I feel much better about my loads knowing EVERY ROUND has the correct powder charge. This is a must have item for any progressive setup. A+ DAA!
Keith Toro
8 Apr 2020
Awesome powder checker. I have been impressed with this model. I borrowed a Dillion model from a friend when using titegroup and found this model. Once you get the sensitivity set. It is right on the money. No annoying false alarms. It only goes off when it is over or under like it is suppose too. I have had two reloading buddies purchase this and they also are happy.
Gregory Soukup
7 Apr 2020
Das Pulverprüfgerät funktioniert hervorragend. Besonders gut ist daß an dem schlanken Prüfstab so gut wie kein Pulver hängen bleibt, wie das beim Dillonorginal leider oft der Fall war. Mit dem Gerät bin ich sehr zufrieden, auch weil es eine schlankere Bauart hat.
Klaus Wissler
24 Mar 2020
I have 2 tool heads (9mm and 40 S&W) for my Dillon XL750 machine, and this powder check is on both. Just follow the instructions and it installs and calibrates in a couple of minutes. Once installed and adjusted to your powder charge, it works flawlessly. I've loaded 10,000 rounds between my 2 tool heads and both have worked perfectly. If I change my powder charge, I just loosen the magnet at the top of the plunger with the press ram at the top of the stroke, and in less than a minute, it's ready to go. I love this powder check and admire the simplicity yet intelligence of the design. I will use this on every tool head caliber conversion I get in the future.
Brian Gedeon