Write Review
Rating: (93)
31 Dec 2022
I purchased this along with the DA Dillon Extra-Short powder bar to load 9mm on my Dillon 750XL. Together they are worth every penny and I'm kicking myself for not buying them sooner! The products are well designed and the setup was a breeze. Once I started loading I was shocked at how well the system worked as I blew through 1000 rounds without a single hiccup! Loading the bullet carousel was not as bad as I had envisioned and took only a couple of minutes. Guys, just
Michael Carnegie
2 Apr 2022
Over all this works very well and has increased the speed that I can reload dramatically. The only complaint is that occasionally the alignment is not perfect when I rotate the tube to the next column of bullets. I'll rotate, they drop but after a few bullet drops, they are hung up in the tube and don't drop. I have to tweak the position of the tube until they drop again. Of course now I have brass with powder to remove from the shellplate before I can continue. This is on the 9mm bulletfeeder.
Pete Reynen
5 Feb 2022
Got the Mini Mr Bullet Feeder for pistols a few weeks ago and it’s been the best addition to my Hornady LnL setup ever! Initially I had problems loading the smaller 100gr bullets (double drops), but Customer Support suggested moving the ball bearings and clip to the bottom setting and everything is perfect now. I just bought the Mini Rifle version as well (for .223) and I’m now cranking out pistol and rifle ammo at an incredible rate thanks to these add-ons. Buy one now, the time you save will be your own!
John Livingston
2 Jan 2022
Funciona perfectamente estoy conforme con la compra, lo único que decir que es un poco caro.
Pedro Lanero Garcia
19 Sep 2021
I love how it looks on my Dillon 750 but I am unable to use it without the short Dillon powder bar. I have been checking for it to be in stock for the last few months on a daily basis to no avail.
Larry Cunningham
4 Aug 2021
Thought this may help with an issue I had. Worked great until one day the projectiles did not feed. After much cursing I discovered that the projectiles were not sized correctly and the coating would hang them up. After a little fiddling I now have I short steel rod with a small weight on the top which I put on top of the tube that is feeding and it was enough to push the projectiles through. Another benefit is when the projectiles (even good ones) land on the top of the case is pushes them down a very small amount which stabilises them when they travel to the next position to be seated and crimped. Made a great feeder even better. Hope this helps.
mark pennington