Product Reviews

I bought one for 223 to use with Mark 7 trimmer. I use this die in the next stage right after FL sizing die. I had adjusted my sizing die so that two headspace gauges and two barrels confirmed it to be ok. How ever the trim die was so tight that some (yes, lubricated) cases got stuck in it even when the mouth of an over length case was not even through to the cutting area. Even worse the cases that didn't get stuck didn't go to headspace after that and what's kinda funny was that those cases came out longer than when they went in. And of course the cases came back with a lot of scratches as the inner surface of the die looked like a face of Freddie Kruger/Deadpool offspring. I probably got the friday afternoon model... Lyman responded to my inquiries by saying that I had set the die too low - when the case was not even high enough to be cut - and should I continue to have problems I should polish the inner surface with 1500-2000 grit sandpaper. So I made couple of 223 shaped sandpaper holders for a drill, started with 400 grit working up to 2000 and some polishing to finish it off. Well - now it works. 2 stars since at least the outside was ok.

nice feature to recognize other people in other places

nice large patches that will hold strong on the target

nothing to compare with media tumbler, the brass are as brand new but if you use pins, I strongly suggest to purchase the magnet also and in any case, the drying is also a must-have

I love the Primafill and pickup tube combo. It took a minute or two to get the hang of it, but it works awesome and I don't have to waste my time picking up one primer at a time with a normal tube anymore. Highly recommend.

Generous size offers a good view. Construction seems solid enough for the purpose. Good value for the money.