.png)
.webp "Cardboard Targets")
Product Reviews
19 Dec 2023
Very good product. Eases the use of powder charge drop adjustment significantly. Also seems to hold the adjustment better, maybe it prevents the adjustment nut/screw from moving on its own during long reloading sessions?
18 Dec 2023
Handy tool, now during training sessions there's no more searching for patches, as I have them on the belt or pants. Also dispenses neatly.
16 Dec 2023
Took too many tries to get this thing to work properly. I have finally gotten to where I feel I can trust the it. I am experiencing a powder mess, seems like when the brass tip hits the powder it forces the powder to split out. I probably won’t buy this again.
16 Dec 2023
Have not used the brass marker too much so far. Seems to work ok need to make some adjustments to get the rounds to land the same direction every time. Also before I ordered the brass marker I was looking for info and found someone suggested using sharpie paint markers. The tips are much softer and do a better job of making. The line is kind of thick not a big deal. Overall I am satisfied and would buy it again. Seem like most things reloading related it will take some playing with it to get everything running smoothly.
16 Dec 2023
I bought the Lynx belt last summed. Cold fall weather clothes caused me to upgrade. The ratchet buckle is perfect but I did have to remove 4 links and relocate the closure to my back. It is a little challenging to keep the belt from biting into the Velcro before it is completely tightened.
16 Dec 2023
Five stars for my purpose. I am loading 9mm with N320. The powder check installed easily and I immediately applied the zip tie hack to hold the sensor up so it enters the case more slowly ar the top of the stoke (as discussed in some forums). I have not had any powder blowing out of the case. It was easy to set up and find the sweet spot. All is well but no improper loads caught yet.
FYI This installation caused me to move the bullet seating operation to station 4. I once, by habit, inserted a bullet in station 3 but caught myself before jamming it hard into the powder check. I did however, jam it far enough that the micro switch flipped to the wrong side of the actuator disabling the powder check until I noticed what had happened.
