Mr.BulletFeeder by DAA Output Assembly
 In stock
€29.95
€1.00
Reward Points
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Thursday 08 June, 2023
Significant improvement over "standard" output assembly. Couldn't reliably feed light 9mm bullets with stand assembly.
Rating: (5 of 5 Stars!)
Monday 20 February, 2023
This size works well for lighter 9mm - it is the size that should come with the Dillon 750 kit that I purchased for 9mm as it will work well with all weights of 9mm - I was essentially forced to by this smaller size in order to run 115gr and lighter reliably.
Rating: (4 of 5 Stars!)
Saturday 19 March, 2022
This works very well with the 100G bullets I load in 9mm. I have also found that it does well with all the 9mm bullets I have loaded. All the way up to 147. If 9mm is all you load then this is all you need!
Rating: (5 of 5 Stars!)
Wednesday 21 July, 2021
Pratique pour modifier un configuration quand on change de calibre...
Rating: (5 of 5 Stars!)
Wednesday 21 July, 2021
Pratique pour modifier un configuration quand on change de calibre...
Rating: (5 of 5 Stars!)
Wednesday 14 July, 2021
Toujours utile quand on souhaite modifier son installation.
Rating: (5 of 5 Stars!)
Thursday 08 April, 2021
The workmanship alone make this particular part a pleasure to behold - that's speaking as a machinist. Changing my hat, the function and fit (Quality Manager) are superb. Assembly, two fasteners and we're done! A note of caution however to new users - Delrin is a plastic and overtightening the...
Rating: (5 of 5 Stars!)
Saturday 23 January, 2021
Works like a charm if you cut it to the right length
Rating: (5 of 5 Stars!)
Monday 03 February, 2014
Great improvment for the old BulletFeeder.
Works perfectly.
Rating: (5 of 5 Stars!)
Friday 07 June, 2013
A must for Mr. Bulletfeeder user able to change calibers on demand.
A bit long for normal usage, but can be shortened by pliers ;-)
Rating: (5 of 5 Stars!)

Mr.BulletFeeder by DAA Output Assembly

(10)
Manufacturers: Double-Alpha Academy
Description
Reviews

Description:

The Output tube assembly is what connects the Mr. Bulletfeeder by DAA’s collator to the dropper. It feeds the bullets into the dropper, keeping them inline and feeding smoothly. It consists of 3 parts:
- The collator output Tube
- The coiled feed spring (38cm long)
- The dropper spring cap attachment

The large Output assembly is required when loading 9mm (over 115gr bullets), .40, or 45. It is included when you purchase a Mr.Bulletfeeder by DAA machine.
The Smaller output tube assembly is required for the rifle calibers (both .223 and .308) as well as when loading very short, light 9mm bullets, such as many of the 90gr bullets used. It is included when you order a rifle caliber Mr.Bulletfeeder by DAA machine.

Note that a small output tube is included with all rifle conversion kits. However, a large output tube assembly in NOT included with a pistol conversion kit. So if you are converting a rifle machine to pistol – you must order a large output tube assembly in addition to your pistol caliber conversion kit.

If you are ordering a 9mm bullet feeder, (or conversion kit) and intend to load very short 90gr bullets – you should also order a small output tube assembly for better performance with these bullets.

Reviews (10)

Thursday 08 June, 2023
Significant improvement over "standard" output assembly. Couldn't reliably feed light 9mm bullets with stand assembly.
Monday 20 February, 2023
This size works well for lighter 9mm - it is the size that should come with the Dillon 750 kit that I purchased for 9mm as it will work well with all weights of 9mm - I was essentially forced to by this smaller size in order to run 115gr and lighter reliably.
Saturday 19 March, 2022
This works very well with the 100G bullets I load in 9mm. I have also found that it does well with all the 9mm bullets I have loaded. All the way up to 147. If 9mm is all you load then this is all you need!
Wednesday 21 July, 2021
Pratique pour modifier un configuration quand on change de calibre...
Wednesday 21 July, 2021
Pratique pour modifier un configuration quand on change de calibre...
Wednesday 14 July, 2021
Toujours utile quand on souhaite modifier son installation.
Thursday 08 April, 2021
The workmanship alone make this particular part a pleasure to behold - that's speaking as a machinist. Changing my hat, the function and fit (Quality Manager) are superb. Assembly, two fasteners and we're done! A note of caution however to new users - Delrin is a plastic and overtightening the fasteners can be a disaster on the threads so be easy.
Saturday 23 January, 2021
Works like a charm if you cut it to the right length
Monday 03 February, 2014
Great improvment for the old BulletFeeder.
Works perfectly.
Friday 07 June, 2013
A must for Mr. Bulletfeeder user able to change calibers on demand.
A bit long for normal usage, but can be shortened by pliers ;-)
You may also be interested in
Dillon Rapid Polish 8 oz.
 Currently out of Stock
Dillon Rapid Polish 8 oz.
0.50 Reward Points
(2)
€15.00
Dillon Small Media Separator CM-500
 In stock
Dillon Small Media Separator CM-500
1.00 Reward Points
(3)
€104.87