In stock
22.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Saturday 13 August, 2022
Prachtige case feeder een verademing in snelheid
Wel altijd nakijken of de hulzen in de goede richting liggen
Rating: (5 of 5 Stars!)
Sunday 31 July, 2022
Handy addition to load cases. Cuts down on the mess of touching lubed cases.
Rating: (5 of 5 Stars!)
Monday 25 April, 2022
The bowl works perfect. Saves time when filling the feeder tubes. This item is a must have.
Rating: (5 of 5 Stars!)
Sunday 10 April, 2022
This does exactly what it says. I'm just amazed by how 223 and 300BLK cases find themselves upright in the tubes. Its a true work of precision simplistic genious. Out of about a dozen full-load cycles, I had most of them with all cases oriented correctly. The other remaining times only one or two...
Rating: (5 of 5 Stars!)
Saturday 27 November, 2021
This mini case feeder loader bowl is fantastic. Works great makes things a lot easier loading brass.
Rating: (5 of 5 Stars!)
Friday 12 November, 2021
Fantastic add-on to the tube. I add the cases to the bowl from a box to have a eaven flow of cases. I fill the tube with 9mm cases in 25 seconds. Great stuff :-)
Rating: (5 of 5 Stars!)
Friday 08 October, 2021
I'm very surprised how efficiently this works. Absolute must if you're getting the case feeder.
Rating: (5 of 5 Stars!)
Tuesday 05 October, 2021
It aids feeding the cases into the tubes tremendously! But the overall assembly is so high in the air I have to remove the tubes to be able to reload them with cases. That is the only reason I give it 4 starts.
Rating: (4 of 5 Stars!)
Wednesday 25 August, 2021
Mini Case Feeder Loader Bowl works very well, better than I thought.
This is a top product which I would like to recommend.
Rating: (5 of 5 Stars!)
Thursday 12 August, 2021
Works great! Can't imagine loading the tubes one at a time.
Rating: (5 of 5 Stars!)
Monday 07 June, 2021
I haven't had a bad feed yet! I load 100 rounds by dropping rounds in the tray and shaking until the tubes are loaded. Easy as pie!
Rating: (5 of 5 Stars!)
Monday 15 March, 2021
The product works great. The only issue we had was the bracket the case tube attaches to cracked. We were able clamp it and it is working as expected.
Rating: (4 of 5 Stars!)
Monday 22 February, 2021
Beats the heck out of loading 1 case at a time. Take a handful at time and shake them in. Works great and loads reliably.
Rating: (5 of 5 Stars!)
Tuesday 08 December, 2020
Fantastic product, easy to use, no more separate feeding cases into the tubes, just drop them in the top shake & back loading again
Rating: (5 of 5 Stars!)
Monday 28 September, 2020
Using the bowl for 9mm casings only. Works like a charm.
Had only 1 case upside down in many many refills.
Simple but vey effective way to fill your tubes.
Rating: (5 of 5 Stars!)
Saturday 19 September, 2020
This loader bowl works well. I have been loading 6.5 Grendel, using the bowl set up for .223. The Grendel round uses the same parent case as the 7.62X39 so I was hoping it would feed the 6.5 cases, and it does. Just throw some cases in the bowl while the whole thing is sitting on the press and...
Rating: (5 of 5 Stars!)
Monday 07 September, 2020
Best $20 I've ever spent. The video says to remove the tubes, but I just throw in a handful while mounted on the press and give it a little shake. Keeps the tubes loaded all the time. I can't see the electric case feeder being a whole lot faster than this system. Certainly fast enough for me. I...
Rating: (5 of 5 Stars!)
Friday 31 July, 2020
This bowl saved me lots of time. Just got it today and tried few times not a single up side down brass. It cuts my time 90% faster. Highly Recommended.
Rating: (5 of 5 Stars!)
Friday 10 July, 2020
This thing works GREAT!!. It also doubles as a stand if flip it upside down.
Rating: (5 of 5 Stars!)

DAA Mini Case Feeder Loader Bowl

(19)
Manufacturers: Double-Alpha Academy

Description:

The DAA Mini case feeder for the Dillon XL650/750 has been a popular product for years. It’s a great way to unlock the full potential of these excellent reloading presses, even without making the investment in the optional electric case feeder. The 6-tube assembly can hold approx. 100 pcs of 9mm brass, and feeds reliably as you reload.

However, filling these 6 tubes can be time consuming – and we are please to offer a solution for that!

The DAA Mini Case Feeder Loader Bowl attaches to the top of your Mini case feeder tube assembly, and sits firmly in place. By dropping handfuls of brass into the large bowl area, and shaking the tube assembly, you can fill the tubes much faster than you otherwise could, by feeding the brass in one at a time. with a little practice you will find the perfect motion and quantity of brass to feed into the bowl, and then an upside down case falling down the tube becomes rare indeed.

We recommend removing the tube assembly from the press in order to fill them.

Included with the bowl is the .223 adaptor plate, which should be used when filling .223 case into the tubes. Fill three tubes, then rotate the .223 adaptor place one position to fill the other three tubes.

A great time saver, making your DAA Mini Case Feeder an even more useful and effective solution!

Product includes large bowl and .223 adaptor plate. 

* Mini case feeder tube assembly shown in some picture is not included

Reviews (19)

Saturday 13 August, 2022
Prachtige case feeder een verademing in snelheid
Wel altijd nakijken of de hulzen in de goede richting liggen
Sunday 31 July, 2022
Handy addition to load cases. Cuts down on the mess of touching lubed cases.
Monday 25 April, 2022
The bowl works perfect. Saves time when filling the feeder tubes. This item is a must have.
Sunday 10 April, 2022
This does exactly what it says. I'm just amazed by how 223 and 300BLK cases find themselves upright in the tubes. Its a true work of precision simplistic genious. Out of about a dozen full-load cycles, I had most of them with all cases oriented correctly. The other remaining times only one or two cases were upside down. I'm pretty sure that's due to my beginner technigue, overloading the bowl with too many cases at once. Worked great on 9mm brass that I keep, might think about reloading that since it works so well. This is defininately saving me from purchasing the motorized case feeder.
Saturday 27 November, 2021
This mini case feeder loader bowl is fantastic. Works great makes things a lot easier loading brass.
Friday 12 November, 2021
Fantastic add-on to the tube. I add the cases to the bowl from a box to have a eaven flow of cases. I fill the tube with 9mm cases in 25 seconds. Great stuff :-)
Friday 08 October, 2021
I'm very surprised how efficiently this works. Absolute must if you're getting the case feeder.
Tuesday 05 October, 2021
It aids feeding the cases into the tubes tremendously! But the overall assembly is so high in the air I have to remove the tubes to be able to reload them with cases. That is the only reason I give it 4 starts.
Wednesday 25 August, 2021
Mini Case Feeder Loader Bowl works very well, better than I thought.
This is a top product which I would like to recommend.
Thursday 12 August, 2021
Works great! Can't imagine loading the tubes one at a time.
Monday 07 June, 2021
I haven't had a bad feed yet! I load 100 rounds by dropping rounds in the tray and shaking until the tubes are loaded. Easy as pie!
Monday 15 March, 2021
The product works great. The only issue we had was the bracket the case tube attaches to cracked. We were able clamp it and it is working as expected.
Monday 22 February, 2021
Beats the heck out of loading 1 case at a time. Take a handful at time and shake them in. Works great and loads reliably.
Tuesday 08 December, 2020
Fantastic product, easy to use, no more separate feeding cases into the tubes, just drop them in the top shake & back loading again
Monday 28 September, 2020
Using the bowl for 9mm casings only. Works like a charm.
Had only 1 case upside down in many many refills.
Simple but vey effective way to fill your tubes.
Saturday 19 September, 2020
This loader bowl works well. I have been loading 6.5 Grendel, using the bowl set up for .223. The Grendel round uses the same parent case as the 7.62X39 so I was hoping it would feed the 6.5 cases, and it does. Just throw some cases in the bowl while the whole thing is sitting on the press and give it a swirl, the cases drop in just fine. This system is a better option than the Dillon case feeder for me, it's simpler to use and saved almost $300 on equipment.
Monday 07 September, 2020
Best $20 I've ever spent. The video says to remove the tubes, but I just throw in a handful while mounted on the press and give it a little shake. Keeps the tubes loaded all the time. I can't see the electric case feeder being a whole lot faster than this system. Certainly fast enough for me. I can knock out a thousand rounds in no time.
Friday 31 July, 2020
This bowl saved me lots of time. Just got it today and tried few times not a single up side down brass. It cuts my time 90% faster. Highly Recommended.
Friday 10 July, 2020
This thing works GREAT!!. It also doubles as a stand if flip it upside down.

Also Available In Set(s)

You may also be interested in