Wednesday 25 January, 2023
This is a well made wrench, I was hoping it would work with my RCBS, Lyman & Lee die lock rings. Unfortunately it doesn't so I will just give it to my friend that has a Dillion press. It would be great it they would make one for RCBS die lock rings.
Ken R***r
Friday 17 December, 2021
Works great, a little thinner around the large portion would be better, but so far it works almost as well as my home made cut and ground down box end wrench.
Robert C G***a
Sunday 04 July, 2021
The wrench is good and fits the lock rings well.
My issue is that the small 6pt end of the wrench does NOT fit the Dillon powder bar adjustment screw (7/16"). Not only that, it doesn't even fit 10mm (it's off by 0.001-2). So, forget about using it for that, just use it for the lock rings.
Is it supposed to be SAE 1" on side and metric 10mm on the other?
Howard M***h
Wednesday 01 July, 2020
The DAA box wrench is what I needed to protect my dies. I was so frustrated with the Dillon open end wrench rounding off flats on die nuts. If you don't have one..get one, you'll thank me later. Fast friendly service from DAA..every time.
Brian C***k
Friday 08 May, 2020
very nice
maybe time to make them for the other sizes to
Daniël T***r
Thursday 16 April, 2020
This is a great tool! I have a Dillon 650 and one of my only complaints of it is trying to tighten the die lock rings is a pain especially with the Dillon wrench which is very sloppy in fit which rounds off the corners of the lock rings. Also being a typical wrench design/shape, the Dillon wrench makes for short turns on a fully loaded tool head. This wrench gets into the tight areas perfectly, feels good ergonomically and really is the tool Dillon should have made for their press. My only criticism (which really isn't) is this tool fits on the lock rings very tightly, there is no slop . I had a couple of lock rings that the corners were rounded on (from the Dillon wrench) and this tool either didn't go down onto the lock ring or was difficult to get on. Once I filed the burrs off the rings there was no issue and no issue on new/undamaged rings. Like I said, this is the tool Dillon should have made but didn't and really is a "must have" tool.
Doug T***k
Thursday 31 October, 2019
Very nice quality. Since it is entirely closed, it is not easy to easily switch around, but it is very useful to just leave on the die if you are experimenting. I have it currently on the seating depth die, and it can stay there while I try different seating depths.
Eelco G***e
Wednesday 09 October, 2019
This wrench is an excellent design, made of stainless steel and completely demurred. Very comfortable grip and slender enough to work between closely fitting dies. A must for Dillon die lock rings. Great to have several on hand !
Joe C***n
Saturday 05 October, 2019
Extremely well made. Fits onto die lock rings that an open end wrench is difficult to use. Deburring has been done so there are no sharp edges. Plus I like the fact the wrench is stainless steel
Joe C***n
Thursday 12 September, 2019
great for the crowed tool heads and making adjustments on the machine
ken R***g
Sunday 11 August, 2019
ein sehr guter Matrizenschlüssel, schade dass es ihn jetzt erst gibt. ein Schlüssel für die größeren Matrizenmuttern wäre noch wünschenswert.
natürlich ein großes Lob für die schnelle zuverlässige Lieferung an Double Alpha Academy
Werner S***n