With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.
We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.
The first area of focus and improvement was the rail, the part which joins the belt hanger ball joint and the holster body.
We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.
The new rail attaches to the holster body more parallel to the gun’s slide, which increases the usable range of adjustment in the ball joint, allowing you to bring the gun much closer to the body than with the previous rail design.
The holster body itself has undergone several improvements as well. The high inner flap which previously covered most guns’ safeties has been lowered, allowing you to obtain a more complete in-the-holster shooting-grip. The material has been made slightly thinner to improve precision fit and retention of the pistol, and the tension spacers have been modified and improved. The cutout in the front of the holster has been lowered further, to facilitate faster holster clearance.
And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.
Available only in Black, for right-handed or left-handed shooters.
2908 Betz Court, Orefield, PA 18069
Fax: (610) 366-9680
Q. My pistol will not fit correctly into the PDR-Pro II holster
In some cases, it can be just one point or corner in the holster that is formed wrong and clashes with one point on the gun… and these kind of things are easily fixed:Open the tension screws and insert the gun.Tighten the tension screws as much as possible – applying pressure onto the gun, locking it firmly in the holsterUsing a heat gun, or even a hairdryer, apply heat to the Kydex, focus...
Q: What are the main features of the PDR PRO II?
A: The PDR PRO II kydex body is made of high quality kydex, folded to tight tolerances, specific to each gun.
Each PDR PRO II will include a thumb screw that will allow for change the gun retention on the fly. The PDR PRO II hanger will work with 1.5-2" belts and has a bulit in ball joint and height adjustment, allowing for the holster to be set up for any build and draw stroke.