In stock
$57.95
Choose options

Latest reviews

Thursday 16 December, 2021
Two dies, two machines and one Mr. Mini Bulletfeeder bullet magazine. What's not to like!
Rating: (5 of 5 Stars!)
Saturday 20 November, 2021
Really a well designed tool. Yes is a bit of a luxury to have a bullet feeder, but this one will make you smile every time, as it works flawlessly.
Rating: (5 of 5 Stars!)
Wednesday 17 November, 2021
I had been fussing around with my 45 acp LNL bullet drop die and having nothing but problems with a Hornaday XTP 185 gr. bullet. I seems the die would only work by dropping 2 bullets at a time because bullet was so short the die could not grab the next bullet. Ordered the Mr.BulletFeeder 45 acp...
Rating: (5 of 5 Stars!)
Thursday 11 November, 2021
I received an out of spec die assembly. Staff quickly replaced item with one that functions perfectly as do two others I have purchased. These are the best on the market.
Rating: (5 of 5 Stars!)
Tuesday 12 October, 2021
A great time saver. I have one for 223, 9mm and 45acp. Works great. The 223 die also works for loading Ruger 204.
Rating: (5 of 5 Stars!)
Monday 27 September, 2021
Best thing since ice cream as they say. Have owned them all and this is by far the best bullet feeder out there. Adapts well to different machines.
Rating: (5 of 5 Stars!)
Wednesday 22 September, 2021
I have owned all the other brands. Wished I would have found this bullet feeder years ago. Simply the best of all brands in my opinion. Easy to set up and adapts to other accessories very easy too. Liked it so much one hour out of the box .I bought another for a different machine.Overall , I’d...
Rating: (5 of 5 Stars!)
Sunday 19 September, 2021
I like them what else can I say cant come up with more that
Rating: (5 of 5 Stars!)
Friday 17 September, 2021
Just what was needed after adding a bullet feeder to my Dillion550.
Rating: (5 of 5 Stars!)
Thursday 09 September, 2021
Finally I have a bullet feeding system that consistently works! I have the 9 mm Mr BulletFeeder die assembly using the Hornady feed tubes. Will eventually buy the mini feeder. Sadly, the Hornady unit never worked consistently. I just set up and ran the mini Mr BulletFeeder 223 with the same great...
Rating: (5 of 5 Stars!)
Saturday 28 August, 2021
It works. Every time.
It would be nice if they had adapters available for those who don't have Dillon or the entire bullet feeding kit.
I use tubes and pipe brass fittings to go from the die to the tube.
Rating: (5 of 5 Stars!)
Monday 16 August, 2021
Works perfectly. Just bought a 2nd to leave in my 9mm toolhead so I don't have to keep switching the feeder die back and forth between 357 and 9mm.
Rating: (5 of 5 Stars!)
Wednesday 14 July, 2021
Indispensable quand on recharge avec des quick-change et pouvoir faire plusieurs type de rechargement dans un même calibre...
Rating: (5 of 5 Stars!)
Friday 18 June, 2021
Purchased the 9mm feeder die, only, for my Hornady AP press. Worked up an adapter, to use my existing feeder tubes. Worked as advertised, better than expected. No problem loading load/powder coat bullets.
It's the way to go.
Rating: (5 of 5 Stars!)
Monday 17 May, 2021
I bought this item because the Hornady version did not work reliably. Not Hornady’s fault as they clearly state that their bullet dropper is for FMJ bullets. I use Xtreme 45 cal 230 gr RN plated. DAA uses a completely different method vs Hornady or RCBS in that it uses three ball bearings rather...
Rating: (5 of 5 Stars!)
Thursday 06 May, 2021
I spent 4 hours last night trying to get a new hornady bullet feed die to work. 230 coated round nose. It would feed once sometimes twice then jam up in the first collet. Polishing, resizing the collet, even heat treating the collet to turn into spring steel. Nothing worked. I stopped by Titan...
Rating: (5 of 5 Stars!)
Sunday 02 May, 2021
I bought this to set up the Bullet Feeder on another turret head so that I would not have to disassemble the setup moving it from one tool head to the other. The Bullet Feeder is just one great product that does what it is supposed to do with no headaches or issues.
Rating: (5 of 5 Stars!)
Tuesday 06 April, 2021
Due to primer shortage have not used! The fit and finish look good. All metal parts should last longer than RCBS' plastic "fingers"!
Rating: (4 of 5 Stars!)
Thursday 01 April, 2021
9mm Product works perfectly! Communication with company and representatives on dies and usage increased my confidence in the company and group as a whole. Already planning to purchase more dies for 45acp and 38spl loading. Thanks DAA!
Rating: (5 of 5 Stars!)
Monday 22 March, 2021
Best bullet feeder out there. Works with anything you throw at it. Jacketed or cast. It just does not matter. I do not believe you can find a bullet this thing will not feed. It just works. About the only way to stop this feeder would be to feed the wrong caliber through it.
Rating: (5 of 5 Stars!)

Mr.BulletFeeder by DAA Die Assembly Only

(149)
Manufacturers: Double-Alpha Academy

Description:

The Mr.BulletFeeder die assembly is the “clever” part of the Dropper, the  part that allows only one bullet to drop while retaining the rest of the stack.

Made of Anodized Aluminum, this assembly  is caliber specific and includes a threaded die body, an inner aluminum dropper tube, a nut, clip and 3 steel balls.

This assembly is the same item used for both the Mr.Bulletfeeder and the Mini Mr.Bulletfeeder by DAA.

These Die assemblies are sold separately, to enable you to set up a 2nd tool head, leaving the die correctly adjusted on each. If similar calibers are in use, such as 9mm on one toolhead and 38 on a 2nd, you can transfer the upper part of the dropper from one to the other, leaving only the die on the dedicated tool head, permanently adjusted. This will save you buying a complete new dropper for the 2nd caliber, and also mitigate the need to detach the wiring and the feed spring from the top of the dropper assembly as you switch over calibers..

Reviews (149)

Thursday 16 December, 2021
Two dies, two machines and one Mr. Mini Bulletfeeder bullet magazine. What's not to like!
Saturday 20 November, 2021
Really a well designed tool. Yes is a bit of a luxury to have a bullet feeder, but this one will make you smile every time, as it works flawlessly.
Wednesday 17 November, 2021
I had been fussing around with my 45 acp LNL bullet drop die and having nothing but problems with a Hornaday XTP 185 gr. bullet. I seems the die would only work by dropping 2 bullets at a time because bullet was so short the die could not grab the next bullet. Ordered the Mr.BulletFeeder 45 acp die and after making a small adapter sleeve, out 1/2" conduit, to us my bullet drop tubes from the LNL die, I was able to load the remaining 500 rounds in less than an hour with absolutely no miss feeds. If you are having problems with your bullet feeder and want a solution, The Mr.BulletFeeder die is your solution even if you need to make an adapter. Best buy I have made in a while, great product.
Thursday 11 November, 2021
I received an out of spec die assembly. Staff quickly replaced item with one that functions perfectly as do two others I have purchased. These are the best on the market.
Tuesday 12 October, 2021
A great time saver. I have one for 223, 9mm and 45acp. Works great. The 223 die also works for loading Ruger 204.
Monday 27 September, 2021
Best thing since ice cream as they say. Have owned them all and this is by far the best bullet feeder out there. Adapts well to different machines.
Wednesday 22 September, 2021
I have owned all the other brands. Wished I would have found this bullet feeder years ago. Simply the best of all brands in my opinion. Easy to set up and adapts to other accessories very easy too. Liked it so much one hour out of the box .I bought another for a different machine.Overall , I’d rate it a 9.5.
Sunday 19 September, 2021
I like them what else can I say cant come up with more that
Friday 17 September, 2021
Just what was needed after adding a bullet feeder to my Dillion550.
Thursday 09 September, 2021
Finally I have a bullet feeding system that consistently works! I have the 9 mm Mr BulletFeeder die assembly using the Hornady feed tubes. Will eventually buy the mini feeder. Sadly, the Hornady unit never worked consistently. I just set up and ran the mini Mr BulletFeeder 223 with the same great results. Save time and money and buy Mr BulletFeeder!
Saturday 28 August, 2021
It works. Every time.
It would be nice if they had adapters available for those who don't have Dillon or the entire bullet feeding kit.
I use tubes and pipe brass fittings to go from the die to the tube.
Monday 16 August, 2021
Works perfectly. Just bought a 2nd to leave in my 9mm toolhead so I don't have to keep switching the feeder die back and forth between 357 and 9mm.
Wednesday 14 July, 2021
Indispensable quand on recharge avec des quick-change et pouvoir faire plusieurs type de rechargement dans un même calibre...
Friday 18 June, 2021
Purchased the 9mm feeder die, only, for my Hornady AP press. Worked up an adapter, to use my existing feeder tubes. Worked as advertised, better than expected. No problem loading load/powder coat bullets.
It's the way to go.
Monday 17 May, 2021
I bought this item because the Hornady version did not work reliably. Not Hornady’s fault as they clearly state that their bullet dropper is for FMJ bullets. I use Xtreme 45 cal 230 gr RN plated. DAA uses a completely different method vs Hornady or RCBS in that it uses three ball bearings rather than a friction collet. It reliably drops all types of bullets except flat nose, I think. Works great and their service department is excellent and very responsive.
Thursday 06 May, 2021
I spent 4 hours last night trying to get a new hornady bullet feed die to work. 230 coated round nose. It would feed once sometimes twice then jam up in the first collet. Polishing, resizing the collet, even heat treating the collet to turn into spring steel. Nothing worked. I stopped by Titan Reloading and picked up the Mr Bullet feeder die only based on reviews. Got home, put a 2in section of heater hose on top, slid in my hornady tube and it fed 100 bullets in 10 minutes. Never missed a beat. Customer for life now, thanks for your product.
Sunday 02 May, 2021
I bought this to set up the Bullet Feeder on another turret head so that I would not have to disassemble the setup moving it from one tool head to the other. The Bullet Feeder is just one great product that does what it is supposed to do with no headaches or issues.
Tuesday 06 April, 2021
Due to primer shortage have not used! The fit and finish look good. All metal parts should last longer than RCBS' plastic "fingers"!
Thursday 01 April, 2021
9mm Product works perfectly! Communication with company and representatives on dies and usage increased my confidence in the company and group as a whole. Already planning to purchase more dies for 45acp and 38spl loading. Thanks DAA!
Monday 22 March, 2021
Best bullet feeder out there. Works with anything you throw at it. Jacketed or cast. It just does not matter. I do not believe you can find a bullet this thing will not feed. It just works. About the only way to stop this feeder would be to feed the wrong caliber through it.
You may also be interested in