Monday 30 December, 2019
its a great item. a little fiddley to set up. the angles are crucial. and occasionally i get 2 heads drop at the same time ......but once it's set......it flys.
Tuesday 03 December, 2019
When it works, it's fantastic.The stuffer part that screws into the (650) press has a tendency to hang (9mm, jacketed) bullets and so a bullet is not always inserted into the case.
I have hopes of tensioning the spring that feeds the stuffer, so it becomes reliable.
Tuesday 23 July, 2019
Arbeitet Klasse. Matrize (9 mm) hatte im Innenbereich einen leichten grad, Geschosse hatten sich an diesem verklemmt. Etwas Feilen und die Matrize arbeitet einwandfrei.
Saturday 23 March, 2019
I had purchased the Mini MrBulletfeeder awhile ago and had a lot of problems with it. I decided to upgrade to the Mr Bulletfeeder and have been very happy with it. I had a bit of trouble getting it set for the 40S&W 180gr fmj fp, due to the small diameter difference between the top and bottom of the bullet. However, once I got it adjusted, I ran 600 rounds through the Dillon 650xl and only had one bullet drop backwards. Excellent addition to the 650! I’d skip the mini model, because you won’t be happy with it. It ended up costing me a lot of money because I had to purchase 10,000 pieces of once fired brass to play with it! Love it!
Thursday 27 December, 2018
I JUST BOUGHT A COMPLETE SET . EVERYTHING TO DO 45 ACP 9MM/38/357 CONVERSION KITS. THE 2 IN ONE SEATING DIES, ANOTHER DROPPER ASSY FOR MY 38/357 SET UPON MY DILLON XL 650 RELOADER ALSO MY 223 SET UP. I ORDERED THE INSURANCE ALSO, CHEAP FOR THE TIME IT IS COVERED FOR.
GOT THAT ONE SET UP SET AND READY TO START LOADING. HAVE NOT GOTTON TO MANY LOADED YET BECAUSE OF HOLIDAYS BUT SEEMS TO WORK GREAT. IT IS GOING TO BE A GREAT HELP ON OLD FINGERS.
ALL THE PEOPLE THERE WERE GREAT AND HELPFUL WHEN I CALLED IN TO PLACE MY ORDER SO I DID NOT FORGET TO ORDER SOMETHING. NOW I AM PROBABLY GOING TO ORDER THE 30 CAL . CONVERSION KIT
SHIPPING WAS QUICK AND A REASONABLE PRICE .
COULD ASK FOR BETTER SERVICE .
THANKS TO ALL THERE.
Monday 06 August, 2018
Purchased Mr. Bullet for 40SW and 9mm quick change kit for my XL650. Install, setup, adjustment, and tuning were a breeze following the manual. Awesome machine, don't know why I didn't purchase long ago. Big increase in my loading rate with timed average of 19rds per minute without pushing. I do occasionally get an upside down bullet due to vibration during loading with the bullet feeder attached to my case feeder. Solution would be a wall mount isolating the bullet feeder from the press vibrations. Mr. Bullet is a total THUMBS UP! Only issue was the micro switch terminals on the bullet droppers (both 40SW & 9MM) were bent during shipping. Suggest they be padded for shipping to prevent. Also I wish a wall mount system was available. All in all if you shoot much you must have....
Friday 18 May, 2018
Little difficult to set up for this rookie. Lots of adjustments. Still getting a double feed about every 20 or so round. That said, it smokes. I can’t out run it. Should have gotten the bigger hopper for the 45 bullets. Can’t do without this machine and as time goes I’m sure I’ll get dialed in perfect.
Friday 05 January, 2018
I Purchased Mr. bullet feeder for my Dillon XL 650 and I have to say I am very impressed. Set up was not difficult and once I had a dialed in my output went up dramatically.
Tuesday 02 January, 2018
I haven't used any of the other bullet feeders out there,but after getting my Mr. bullet feeder and getting it set up I wouldn't buy anything else.
This system is very well thought out,works perfectly,adjustments are a piece of cake, and unit is very compact for when space is an issue. Great product!!!
NOTE; I did have one issue when setting up the unit that needs to be addressed in future production runs.
This has to do with the mounting bracket set up. There is an issue when assembling the vertical rod into the round mounting puck.
The problem has to do with the radiused ends on the vertical rods.
When the vertical rod is assembled into the bottom puck where it bottoms out against the horizontal rod,and the set screw is snugged up
it engages the radius on the vertical rod and pushes it up out of the puck. The simple fix was to just grind the radius portion off the rod end so
it will have full contact with the set screw.The best fix would be to just re-position the threaded set screw hole a little closer to the center of the puck
to avoid contacting the radius on the rod end.
Great! compact easy adjustment 5-STARS
Friday 15 September, 2017
After researching this feeder, I decided to add it to my Dillon 650. The combined price with conversion unit was a savings over buying individually. Delivery was quick and while the written instructions supplied with the unit are somewhat hard to follow, watching the on-line videos supplemented the set up well. I was fortunate to have flawless operation with 9mm 147 plated RN bullets after completing all the steps for initial setup. I've loaded a few thousand rounds so far, and the process is much faster and more consistent than before; I'm very pleased! I've subsequently ordered an additional caliber conversion as it will be hard to go back to manually loading bullets since using this unit.
Wednesday 22 March, 2017
a little bit of experimenting to get set up properly but seems to work real well once set up.