Combo: Dillon 750, Mark 7 650 / 750 Pro Autodrive and Mr.Bulletfeeder

Dillon Precision Inc.

Key features

Case Feeder Plate - Dillon or DAA
1 x Case Feeder Plate - Dillon or DAA
Type
 Item in Stock | Usually dispatched within 24 hours
1 item(s)
$44.95
Dillon XL 650/750 Variable Speed Case Feeder w/o Plate
1 x Dillon XL 650/750 Variable Speed Case Feeder w/o Plate
 Item in Stock | Usually dispatched within 24 hours
1 item(s)
$299.95
Dillon XL 750 without Case Feeder, No-Cal
1 x Dillon XL 750 without Case Feeder, No-Cal
 Item in Stock | Usually dispatched within 24 hours
1 item(s)
$738.95
Mark 7 650 / 750 PRO Autodrive
1 item(s)
$2,349.95
Mr.Bulletfeeder by Double-Alpha Gen 2
1 x Mr.Bulletfeeder by Double-Alpha Gen 2
Caliber
 Item in Stock | Usually dispatched within 24 hours
1 item(s)
$519.95
Total Price:
Configure
$3,953.75 $3,894.45 Save $59.30 Instantly
4 payments of $973.62 with Sezzle
$20.00 Reward points
(1)
 Item in Stock | Usually dispatched within 24 hours

Latest reviews

hanzel ***
5 May 2020
The machine is tough at times to get running smooth but there are lots of forums to solve every issue. Some issues you will have are going to be mainly with getting the mr bullet feeder to feed bullets reliably. I still believe it is well worth the money to be able to automate the reloading process.
Rating: (5 of 5 Stars!)
Important Note
DILLON XL750 NOTE
The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. As a solution to this issue we are pleased to offer our  Extra-Short Dillon Powder Bar. (sold separately)

Description:

The bundle includes:

1x Dillon 750 Reloading Press (with case feeder)

1x Mark 7 650 / 750 Pro Autodrive

1x Mr.Bulletfeeder Gen 2

 

We Also Recommend
(3)
Important Note
$149.95
$3.50 Reward points
(93)
PRIMER-PRO NOTE
Some types of primers are tacky/sticky. These may not slide well through the slots in the Primer Pro Disk or down the Exit Ramp. This can lead to a slow output rates and/or poor exit ramp/hole performance. One simple solution to this issue is to apply a little silicon to the primers before loading them into the Primer Pro, as shown  here.

Another effective solution is to periodically clean/lube the Primer Pro plastic parts using a plastic cleaner/Polish or dry lube, such as Pledge, Cockpit spray cleaner or the likes. As shown  here.

With one or the other solution applied, all types of Small Primers can successfully be used.

The Primer-Pro is available for small primers only!

Important Note
$199.95
$5.00 Reward points
(35)
Important Note
$39.95
$1.00 Reward points
(46)
Important Note
$17.95
$1.00 Reward points

New Products

Important Note
$30.00
Important Note
$109.95
$3.00 Reward points