Product Reviews

Great inner belt. I prefer it over another belt from a different vendor.

Best $20 I've ever spent. The video says to remove the tubes, but I just throw in a handful while mounted on the press and give it a little shake. Keeps the tubes loaded all the time. I can't see the electric case feeder being a whole lot faster than this system. Certainly fast enough for me. I can knock out a thousand rounds in no time.

These bullet feed dies are the best made! Easily drops lead and jacketed bullets without issue. I've tried the Lee, RCBS, and Hornady systems, and all have problems. Save yourself time and $$, just purchase the MBF dies.

I have an older case feeder that liked to “bite” pistol cases causing jams prior to dropping them down the tube. I thought this upgrade would 100% fix the problem by slowing down the plate. Unfortunately, it doesn’t. But it happens less now. Regardless, these older motors eventually go bad. So I’m glad to have a new motor on there.

I have an older case feeder that liked to “bite” pistol cases causing jams prior to dropping them down the tube. I thought this upgrade would 100% fix the problem by slowing down the plate. Unfortunately, it doesn’t. But it happens less now. Regardless, these older motors eventually go bad. So I’m glad to have a new motor on there.

Practical shooters: if you have become terminally frustrated dealing with bulged cases (.40 S&W, 9mm, etc.), this little machine may be the answer to your prayers. It's absolutely DISMAL when your high-output reloading setup sits idle, while you get old cranking one piece of brass at a time through a push-through die with a single-stage press! The Mini Roll Sizer not only removes the bulge, it does so with amazing speed and virtually no effort. Connect the Roll Sizer to your case feeder with the supplied flexible tube - then sit back and enjoy your favorite beverage while more than 1,300 healed cases per hour drop into your collection bin! OK, it's not cheap - but put one of these to work in your reloading room and you'll have a very difficult time getting the grin off your face! Many thanks to Mr. Kevin Whitehead (from Australia), who developed this little jewel.