Product Reviews

I bought one of these primer racks and collars. Liked it so much I bought another for the rest of my primer tubes. Well made and work great.

Tension spring assemble is just what I needed. My Hornady bullet drop assembly won't work with fmjbt bullets, because of the contour on the bottom. Which is why I bought the Mr. Bullet Feeder die (.224). The bullet hopper attached to Mr.BF die, would't let the die function all the time. The spring assembly has fix the problem.

What a great Product, it realy works fantastic I am very happy with it

The toolholder doesn't stay in place on my Dillon XL650 and thus is not really useful. The wrench is not ideal. Should be opened on one edge: for example: impossible to mount a powder dispenser in a convenient way. You need to unmount your powder dispenser, place the wrench, mount powder dispenser, adjust the die, tighten it, dismount the powder dispenser again, remove the wrench and mount dispenser. Hex keys are OK

Exceeded my expectations. Pretty simple to set up, and with a little care and attention during set up and change over I'm able to get consistent results. Audible and visual alarms provide dual sensory inputs, and for me, a valuable addition to my reloading process.

Once adjusted is very good. Difficult but not impossible to adjust. The problem is when the correct amount of powder is in the case, it is difficult to hold the stem still while getting magnet at just the right height and then tighten the allen key. Then run the press and it will beep when the next round has the correct charge, so have to adjust several times until finally right. Once adjusted it is awesome, really a great tool to have. I would suggest having clips to hold the stem at the correct height so you can easily set the magnet correctly the first time, maybe clips to hold the magnet too before tightening down.