Product Reviews

the best....nothing else to add. DAA service is fast and accurate, what ask more?

This holster is a game changer. I love it! Smooth as silk draw but also very sturdy

Very nice & strong material. Easy to assemble and attached to the belt. Magnets are not so strong nor so weak. Just easy & quickly release the mags during competition

easy to install works great very high quality this is a great purchase set-up video helped for a much easier install

Excellent customer service. Very easy to deal with. If you need a special part contact customer service. They are knowledgeable about the products they sell, and they ship quickly.

This product serves its purpose, but there are three things that could be improved. First, the plunger picks up powder and drops it on the press. Cleaning the brass plunger, and using dryer sheets to reduce static does not help the problem. Perhaps some sort of coating on the plunger would help. Second, it's difficult to rotate the red die body in the press while keeping the sensor stationary. One direction of rotation is easy, the other very tight. Fully loosening the socket head screw does not decrease the friction. Finally, adjusting the magnet to the correct level is a difficult operation. The smooth shaft provides no index to see the amount of movement while adjusting. If the magnet slips, the starting point is lost. Perhaps threading the shaft and magnet would allow an incremental adjustment, and prevent loss of the starting point. [DAA Reply]: Thanks for your feedback and comments. It is appreciate. This may help: Indeed, with some powders, in some climates, small amounts of powder can be picked up through static. This is difficult to avoid but typically is not an amount that has any real effect on function/accuracy. we updated the shoe from plastic to brass to help with this, but its not a perfect solution. The plastic bracket is indeed made of firm material and can be tight on the die to rotate even when the screw is open. This can be easily overcome by inserting a little wedge, like a match or some folded carboard to keep it open while you setup. Threading the rod for fine adjustment is a good idea we did toy with, but found that it added too much friction when the rod was reversed for 223. You can use a pencil to mark a reference line on the side of the body of the powder check, which is near the magnet, and use that for a reference while setting up.