Product Reviews

Another great piece of innovation from DAA, this belt is super stiff and infinitely adjustable, what more is there to say but highly recommended. Great job DAA.

An ingenious solution from the masters of innovation at DAA. This is the perfect solution for many different pistols, the included shims ensure a secure fit and the with no play that can be found in other holsters. I got the Type-A and will be investing in a Type-B block soon so I can quickly switch the blocks out and be able to run my other pistols. This is a game changer and will be the last holster I will ever need. Great job DAA.

The Alpha-XiP pouches from DAA offer complete adjustability and are excellent quality. With the included inserts for a variety of magazine types this is the last rig I will ever need. Highly recommended.

Fantastic holster and innovation from DAA, excellent quality and every detail has been perfectly executed. Highly recommended.

Great! Had one minor failure to drop in 500 rounds with 124gr lead bullets. It took less than 5 minutes to get the right adjustment set. Compare that with my hornady bullet feeder which would experience a problem every 10 or 20 rounds. The DAA is a no-brainer, wish I had not wasted $$ on the hornady thing.

After reloading for many years, I recently made the transition to a progressive press. I primarily reload 9x19 and selected a Mark 7 Apex 10 press. The DAA Powder Check 2.0 is installed immediately following the powder drop and before the bullet drop. The DAA Powder Check 2.0 installed and adjusted easily. The ONLY issue I have with the Powder Check 2.0 is that it did create a significant mess on the shellplate after 200 to 300 rounds. The problem is not caused by static electricity, but rather the airflow caused by the powder check brass plunger displacing the air inside the case during the stroke. The problem is likely more significant when loading 9mm with fine powders (my case). Also, the fact that the brass plunger enters the case at the point of the stroke when the tool head is moving most rapidly doesn't help. After much weeping and gnashing of teeth, I was able to mitigate the issue substantially. After setting the powder check die depth correctly, I purposely inserted a case that was loaded with powder 1 grain lighter than my normal charge and cycled the toolhead down. With the toolhead down, I put a zip tie around the steel shaft at the top of the die so that the plunger could not drop any lower during operation. I then removed the light loaded case, and replaced it with a correctly charged case to complete the setup (magnet position). Basically, I just reduced the speed that the brass plunger is moving when it enters the case now. Doing this, the powder mess was almost completely eliminated and the powder check still identifies incorrect loads. My initial thought was to give a lower review, but I believe the problem I encountered was due to the combination of the case dimensions, type of powder, dimensions of the brass plunger, and speed of the press stroke in my circumstance. It's a very innovative product that works quite well in most circumstances. 4 stars and I will purchase the DAA powder check again if the need arises.