Mark 7 Autodrive to Apex 10 / Evolution Pro Conversion Kit

If you are a Mark 7® customer with an Autodrive - this conversion kit is for you.  The kit contains everything you need to turn your current Autodrive into an Autodrive for your Evolution.  Once you get the Apex 10 / Evolution™ press you will be able to bolt it onto the base of your Autodrive and you will have the equivalent of an Apex 10 / Evolution™ driven buy the Autodrive.

Included with the package are the following items:

• Kevlar reinforced drive belt 
• Evolution sprockets 
• Sprocket to press attachment & hardware
• Evolution software and firmware
• Stencil template, drill and tap

The process involves laying the stencil on the base of your current Autodrive.  Carefully drill holes with the included drill bit as indicated in the stencil.  Then use the included tap to create the threads in the drilled holes.  Now you have holes that accommodate the base of the Evolution press - simply bolt the press to the base, connect the included hardware and you are ready to go !  Available for your current 1050X/PRO auto drive.