Installed easily. I watched the entire installation video before assembly. Had to remove .015 from plastic part that mounts to press, a rough file worked great. I have the factory Dillon handle so no problems with clearance. You can manually fill the bottom tube by running the press up halfway and actuating the part above the center bolt by hand.

Works as advertised once adjusted. Customer service is quick and knowledgeable about the product. I initially failed to adjust the upper section placing it about 1/8 - 3/16" too far toward the front of the press which made the throw of the case feeding shuttle to long. Once I talked to the customer service and was told how to adjust it I made the adjustment noted above, moving the upper section to the back of the press and the issue was resolved. I've had the unit less than a week and have loaded about 800 rounds of 9mm so far. The loader bowl is well worth adding to the purchase too.

Got mine Friday and it took some time to install. First my press is 30 years old. In video it was said you would need to file on newer machines. Not correct as mine had the lip and needed to file down. IMPORTANT it did not work with Dillon roller handle. There was not enough clearance. I was loading 9mm and missed the need to put spacer in. Rewatched video and saw went in back side. I think in short while it will be worth the investment.