Product Reviews

Not a lot to say on these. I bought 3, one for 9mm, one for 45ACP and one for .223 Remington. They work as intended and allowed me to setup the powder checker right next to the powder charger.

I purchased 3 of these powder checkers and am impressed by the ease of installation and how well they work. I am more of a "I can install it much easier if I can see it done" and not so much read about how to install it. So I watched the video on you tube. They work great on my 9mm and 45ACP but was a bit finicky when I tried to set it up for the .223 Remington/5.56x45 using CFE223 powder. The rod tends to rub on one side of the cartridge brass and sometimes the rod won't go all the way down to the powder. This does result in some false alarms. I also had a heck of a time dialing in the alarm area where the case with the proper amount of powder should not trip the alarm. I did notice that when the rod does go all the way to the top of the powder it sometimes goes past that point and pushes the powder aside. This sometimes results in the alarm tripping as it thinks there is not enough powder in the case. I also think the powder I'm using, (CFE223), may be part of this problem. If they could figure out some way to keep the rod from going deeper into the case due to the rod pushing the powder to the side, that would be great! All in all this is a great system and certainly worth the money.

Must have spares for any serious shooter running Dillion presses

Awesome holster for Walther Q5 Match SF, just note you have to do a wee bit of fitting

Works great! I just wish there was an easier way to see the tubes as they are being emptied.

Excellent product! It is everything you would expect a Dillon press to be. A lot of people have commented about “what are the differences “ between this and the older 650. From what I know it’s the primer system. I’ve never used a Dillon press before, so I really don’t have a good comparison. I can tell you, I’m kicking myself for not doing this sooner. If you are getting into competitive shooting, you NEED this. Thinking that you can load on the “other” presses may work for hobbyists, but you really have to start here to load the volume of ammunition you will need/want.