Product Reviews

Works very well. Upon receiving it, I inserted a Dillon primer tube and tried it out. Had a minor issue with primers flowing smoothly into the tube, so I looked into the hole and discovered a few very tiny piece of plastic flashing. Took a small dowel and wrapped some 800 grit sandpaper around it and slicked up the internals. Works slick as a button now! Good product and would recommend to anyone.

I like this rack well enough that I bought a second one. I mounted them on my under bench cabinet door, one inside and one outside (back to back).

I changed from a 9mm set up to a 223 using the Conversion Kit for the rifle. It was easy and quick as long as you read and follow the instructions. DAA even has helpful videos on You Tube if you need more help. Mr. Bulletfeeder has made my reloading even more enjoyable and much quicker. I am using a Dillon RL 1050 and would strongly recommend the system.

Fantastic product - however it would be even better if there was the option to select an even shorter mag then 140mm. One that would be more alike with the actual mags used in the standard division.

This tool is worth the money to get the job done. Its rugged, easy to use, and built strong. Changed sights of a SIG P210 and SIG P220 X6 without any problem. To avoid scratches, I use pieces of leather between the pushers and the slide.

Set this up on a Hornady LNL Progressive press with 9mm shell plate , Red Anodized threaded fitting wouldn't go down far enough to allow casing to lift internal plastic bushing to activate the micro switch , hit the top of shell plate ! Had to put in lathe and turn down the threaded area like EVERY die manufactured to put a step in it aprox. 3/16" to allow it to fit properly & actually work . Besides that , works like a champ