In stock
$489.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options
We Also Recommend
$22.95
 Currently out of Stock
$24.95
$159.95

Latest reviews

Monday 19 April, 2021
As it says in the video, you need to adjust the angle of the machine and the bullet orientation mechanism to suit your bullet. Fiddly but not difficult.
Once you have got these right, it's great.
Anyone shooting a lot, will benefit greatly from this little machine.
Rating: (5 of 5 Stars!)
Thursday 04 March, 2021
I told my wife I bought mine to speed up my reloading so I could spend more time with her. We've been married for almost 42 years so she didn't believe me! When I got my Mr. BF I had my 750 but no case feed so I really took my time and set the die assembly and tube perfectly. That was easy and...
Rating: (5 of 5 Stars!)
Monday 08 February, 2021
Can't believe i loaded on a dillon for 30 years without one, amazing increase in loading speed
Rating: (5 of 5 Stars!)
Thursday 07 January, 2021
One of the best purchases I have made for my dillon reloading machine. I'll admit I was skeptical at first. But after having purchased one in 9mm, a week later I bought a conversion kit for 45ACP. As long as you set it up correctly, this thing works like a charm. I'm very happy so far with my...
Rating: (5 of 5 Stars!)
Saturday 02 January, 2021
The bullet feeder works great, I have already produced over 2000 rounds.
I don't know how I was able to work without the bullet feeder until now.
I would never give it away.
Rating: (5 of 5 Stars!)
Friday 25 December, 2020
A great product, easy to install with very explanatory instructions and tutorials. With the case feeder it is a perfect match and reloading becomes pleasant and very, very fast.
The best purchase made in recent years, I wonder how I managed to do without it for so long!
Rating: (5 of 5 Stars!)
Friday 11 December, 2020
Negative reviews on the Mr. bullet feeder are based on your failure to adjust the machine correctly. Adjust the nose plate, easy to do with a screw driver, adjust plate in or out so it will guide the tip, pay attention to the base of the bullet, to far in will cause it to flip all bullets. Don't...
Rating: (5 of 5 Stars!)
Wednesday 18 November, 2020
ottimo prodotto, ho solo variato il montaggio installando una staffa di rinforzo fra la vite di fissaggio del motore e la vite di fissaggio del supporto dell'alimentatore di bossoli sul telaio della pressa, perchè altrimenti l'eccessivo peso dell'alimentatore di palle con all'interno le palle,...
Rating: (4 of 5 Stars!)
Monday 16 November, 2020
Can’t believe I waited so long to get this. Had a little trouble at first but once dialed in it was great
Rating: (5 of 5 Stars!)
Thursday 12 November, 2020
Should have done this years ago. Is an investment but definitely worth the money. Followed the setup manual and with a little tweeking it works nicely. No problems yet with bullets or otherwise. Happy user.
Rating: (4 of 5 Stars!)
Tuesday 20 October, 2020
The cost of a bullet feeder and the fact that many don't work well kept me from buying one for years. After reading many good reviews on the Mr Bulletfeeder I broke down and bought one last month and now I wish I'd bought it sooner it's a great product. I've used it for about 4,500 coated,...
Rating: (5 of 5 Stars!)
Sunday 04 October, 2020
I recently (9/20) purchased a Mr. bulletfeder for my Dillion 650 press. What a life changer and how it works with my equipment.I watched several of your on line videos along with utlizing the instructions manuals.The unit went together with ease. Took me about 11/2 hour to fully get working. This...
Rating: (5 of 5 Stars!)
Wednesday 23 September, 2020
This is to revise my comment about using cast bullets with the feeder. Cast bullets lubed will not work with the drop tube design. As soon as the lube contacts the three retaining balls they stick in the open position. The lubed bullets themselves will also hang up in the drop tube. Powder coated...
Rating: (4 of 5 Stars!)
Wednesday 16 September, 2020
Got my Mr. Bullet feeder yesterday I've been wanting one for years I just wouldn't spend the money that was a mistake. I love this thing it was easy to install and only took a few min. to work the bugs out. All I need now is a few more primer tubes and I'll be ready to rock and roll.
Rating: (5 of 5 Stars!)
Tuesday 08 September, 2020
This is by far one of the best add on products. The newer design should be able to use cast bullets where the original design could not, a reason for not buying years ago. Some fine tuning and when you understand what the adjustments do it drops bullets base down every time. No more handling of...
Rating: (5 of 5 Stars!)
Friday 31 July, 2020
One of the two biggest time savers for reloading on a progressive press.
Rating: (5 of 5 Stars!)
Friday 24 July, 2020
excellent product. it does take some knowledge and study to get it set up right - to get 100% reliable bullet flipping and bullet dropping. once you have it right, it works great.
Rating: (4 of 5 Stars!)
Tuesday 14 July, 2020
My Mr. Bulletfeeder worked out great. I made a separate mount rather than attaching it to the case feeder which made it easier to get at when loading bullets. The little inserts that turn the bullets to feed base down were a little tricky to understand the concept but once you get it you say to...
Rating: (5 of 5 Stars!)
Tuesday 30 June, 2020
I can't imagine producing ammunition without this device.
Rating: (5 of 5 Stars!)
Thursday 11 June, 2020
Exceptionnel !!!
Mon regret : de ne pas l'avoir acheté plus tôt......
Rating: (5 of 5 Stars!)

Mr.Bulletfeeder by Double-Alpha - Pistol and Rifle

(86)
Manufacturers: Double-Alpha Academy
DILLON XL750 NOTE
The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. As a solution to this issue we are pleased to offer our  Extra-Short Dillon Powder Bar.

Description:

DAA has been the proud European distributor of Mr. Bullet Feeder since 2006. It makes one wonder how they ever reloaded without one...  Those who reload a lot, quickly appreciate the efficiency and reliability of this ingenious Patented system.

However, Mr. Bullet Feeder was always been a little “rough” in its appearance and finish.  It was made from existing materials and parts, and as such never had the sleek professional look and feel of a refined “production” article.  Additionally since the bullet feeders have always been hand made, in moderate quantities, production costs have been high, resulting in demand, which always exceeded availability.

Now, all this has changed! DAA proudly introduced the DAA Mr. Bullet Feeder in 2012.  DAA and Rak Systems teamed up in retooling and redesigning the Mr. Bullet Feeder, with fantastic results.  The  Mr. Bullet Feeder by DAA, manufactured by Double-Alpha Academy under license by Rak Systems, is a professional, hi-tech version of the original.  It is lighter in weight and more compact than the previous models.  This new streamlined product is easier to install and set up, while retaining the same flawless performance and efficiency of the original design.

In fact, an entirely new US Patent Pending dropper system allows this new model to function even better and longer than before. The new dropper design eliminates the need for any spring or small plastic parts in the dropper head, and allows it to function entirely by gravity and an ingenious geometric design.

Finally to top it all off - DAA offers the DAA Mr. Bullet Feeder at a far more affordable price!

If you have never tried a bullet feeder on your progressive reloader – don’t wait any longer!  It will cut the time and effort involved in reloading practically in half!  A must-have item for any serious shooter.

The new Mr. Bullet Feederby DAA is available in 9/38, 40SW/10 mm, .45, and in rifle calibers .223, .308, and 6.5x55mm. (See rifle calibers under other listing).

US Patents: US 7,497,155 B2 and US 8,661,959 B2

Click here for user instructions for this and other products.

Reviews (86)

Monday 19 April, 2021
As it says in the video, you need to adjust the angle of the machine and the bullet orientation mechanism to suit your bullet. Fiddly but not difficult.
Once you have got these right, it's great.
Anyone shooting a lot, will benefit greatly from this little machine.
Thursday 04 March, 2021
I told my wife I bought mine to speed up my reloading so I could spend more time with her. We've been married for almost 42 years so she didn't believe me! When I got my Mr. BF I had my 750 but no case feed so I really took my time and set the die assembly and tube perfectly. That was easy and when the case feed came I bolted it on and it was off to the races. Everyone talks about fast and easy. It was and it is. But I believe that accuracy is enhanced by the bullets being set straight in to the flared case mouth. I always tried to be careful when putting the bullet into the case by hand but Mr. BF makes it fast, easy AND accurate. My confidence in my reloads really went up a lot. Now if I could just get some primers! Alex Ragulsky
Monday 08 February, 2021
Can't believe i loaded on a dillon for 30 years without one, amazing increase in loading speed
Thursday 07 January, 2021
One of the best purchases I have made for my dillon reloading machine. I'll admit I was skeptical at first. But after having purchased one in 9mm, a week later I bought a conversion kit for 45ACP. As long as you set it up correctly, this thing works like a charm. I'm very happy so far with my purchase and plan on getting more conversion kits for the various other calibers that I reload for.
Saturday 02 January, 2021
The bullet feeder works great, I have already produced over 2000 rounds.
I don't know how I was able to work without the bullet feeder until now.
I would never give it away.
Friday 25 December, 2020
A great product, easy to install with very explanatory instructions and tutorials. With the case feeder it is a perfect match and reloading becomes pleasant and very, very fast.
The best purchase made in recent years, I wonder how I managed to do without it for so long!
Friday 11 December, 2020
Negative reviews on the Mr. bullet feeder are based on your failure to adjust the machine correctly. Adjust the nose plate, easy to do with a screw driver, adjust plate in or out so it will guide the tip, pay attention to the base of the bullet, to far in will cause it to flip all bullets. Don't have any tension on the drop spring tube, will cause drop tube to double feed or dump them all. Videos on the machine are available, You Tube and Double Alpha. For the Hornady guy's, you will need to extend the hanger bracket so there is no tension on the spring tube for proper bullet dropper tube function, simple to do with flat stock of your choice with 2 holes to drill and by the way the Hornady bullet feeders suc k, you guy's know what I'm talking about. Bottom line if you want to reload fast get one.
Wednesday 18 November, 2020
ottimo prodotto, ho solo variato il montaggio installando una staffa di rinforzo fra la vite di fissaggio del motore e la vite di fissaggio del supporto dell'alimentatore di bossoli sul telaio della pressa, perchè altrimenti l'eccessivo peso dell'alimentatore di palle con all'interno le palle, sforzava troppo sul bordo della plastica dell'alimentatore di bossoli.
Monday 16 November, 2020
Can’t believe I waited so long to get this. Had a little trouble at first but once dialed in it was great
Thursday 12 November, 2020
Should have done this years ago. Is an investment but definitely worth the money. Followed the setup manual and with a little tweeking it works nicely. No problems yet with bullets or otherwise. Happy user.
Tuesday 20 October, 2020
The cost of a bullet feeder and the fact that many don't work well kept me from buying one for years. After reading many good reviews on the Mr Bulletfeeder I broke down and bought one last month and now I wish I'd bought it sooner it's a great product. I've used it for about 4,500 coated, plated, and jacketed 9mm bullets with no issues. I also bought the DAA Primafill because I hate filling primer tubes by hand it also works well It loves Federal primers but is much slower with brass primers like Fiocchi and Winchester. Both products have been great time savers and have sped up my production and given me more time for QC.
I've been an avid shooter and reloader for about 45 years and always stock up on supplies before an election but 2021 has me worried get out and VOTE.
Sunday 04 October, 2020
I recently (9/20) purchased a Mr. bulletfeder for my Dillion 650 press. What a life changer and how it works with my equipment.I watched several of your on line videos along with utlizing the instructions manuals.The unit went together with ease. Took me about 11/2 hour to fully get working. This addition has made my reloading so much faster and enjoyable , would recommend to anyone to purhcase as it is truly worth the buy. I also want to give recognition to Josh and Tom at Alpha as I had trouble shooting questions along the way and they were able to walk me thru the proces in our phone conversation
Wednesday 23 September, 2020
This is to revise my comment about using cast bullets with the feeder. Cast bullets lubed will not work with the drop tube design. As soon as the lube contacts the three retaining balls they stick in the open position. The lubed bullets themselves will also hang up in the drop tube. Powder coated bullets with no lube grooves similar to jacketed bullets should work the same and I don't have any to test. Any bullet with a solid smooth surface should drop and feed correctly. I should have tested before assuming lubed bullets would feed correctly. All lubed bullets will have to be hand loaded which does slow down the loading process. Other than that the bullet feeder does perform almost flawlessly when setup correctly.
Wednesday 16 September, 2020
Got my Mr. Bullet feeder yesterday I've been wanting one for years I just wouldn't spend the money that was a mistake. I love this thing it was easy to install and only took a few min. to work the bugs out. All I need now is a few more primer tubes and I'll be ready to rock and roll.
Tuesday 08 September, 2020
This is by far one of the best add on products. The newer design should be able to use cast bullets where the original design could not, a reason for not buying years ago. Some fine tuning and when you understand what the adjustments do it drops bullets base down every time. No more handling of bullets, saves a lot of time. Need it for a new press coming soon.
Friday 31 July, 2020
One of the two biggest time savers for reloading on a progressive press.
Friday 24 July, 2020
excellent product. it does take some knowledge and study to get it set up right - to get 100% reliable bullet flipping and bullet dropping. once you have it right, it works great.
Tuesday 14 July, 2020
My Mr. Bulletfeeder worked out great. I made a separate mount rather than attaching it to the case feeder which made it easier to get at when loading bullets. The little inserts that turn the bullets to feed base down were a little tricky to understand the concept but once you get it you say to yourself oh that's how it works--simple! DAA is a great company, I've purchased several items from them!
Tuesday 30 June, 2020
I can't imagine producing ammunition without this device.
Thursday 11 June, 2020
Exceptionnel !!!
Mon regret : de ne pas l'avoir acheté plus tôt......
Setup

Q: Is it necessary to use the powder funnel/expander that came with the system?

We recommend installing the new powder funnel/expander (for handgun calibers) on your press. It has been machined with a modified profile...

Video Tutorials

Meet Saul Kirsch of Double-Alpha Academy and Rick Koskela, the original inventor of the Mr. Bulletfeeder by Double-Alpha. The two will introduce the new system to you, and show you how to set up you bullet feeder.

 

Saul...

Adjustment

Q: When mounting the collator, what is the best angle to use?

For the majority of bullet types, a collator plate angle of 45 degrees will provide excellent results. When the surface of the plate is set to and angle of 45...

Rifle Caliber

Rifle 6.5x55mm video tutorials







 

 

223/5.56 Setup Information

Collator
The bullet collator...

Troubleshooting

Q: I installed my Bulletfeeder 7 months ago and have been very pleased with it. The last time I used it was about three weeks ago and when I turned it on just now nothing happened. No motor noise at all. I checked all the fittings and...

General questions

Q: I would like to use a mr bullet feeder for 9mm and 223 on my Dillon 650. Do I need to buy two separate units (one for pistol and one for rifle) or can I use one unit and a conversion kit?

All you need is a Mr.BF...

Also Available In Set(s)

You may also be interested in