Tuesday 28 January, 2020
The funnel works great it seats the bullet in place, didn’t have a bullet not seated properly before seating the bullet. I would have given it a 5 star but because every time it goes up to flare the case and powder on the way down the brass is sticking to the funnel and spill sone of the powder. I lube my bass before it goes in the case feeder even tried lubing the mouth but still sticks. Lots of powder spill loading 9major.
Donald D***z
Tuesday 31 December, 2019
Works as advertised, holds the bullet straight for the next step in the process.
JOEL M***i
Friday 20 December, 2019
very useful product for inserting the ball into the cases more quickly and straight
massimo a***i
Saturday 16 November, 2019
The Mr.BulletFeeder Powder funnel for the Dillon press is perfect for properly expanding a case mouth so that the bullet fits perfectly straight and securely; without belling or overworking the brass. You do not need to have a Mr. BulletFeeder to enjoy the benefits. Highly recommend.
Kent C***k
Wednesday 23 October, 2019
excellant product, makes loading a breeze bullets fit consistantly
Allen B***r
Thursday 22 August, 2019
I found out about your product thru a forum I visit. The person said your powder funnels solved his problem with seating and O.A.L. I was impressed by his comments and ordered three of them for my three presses. They are fantastic, I think Dillon should use your product in their new presses as standard equipment!!!!
Steve B***y
Sunday 18 November, 2018
I like everything about the Dillon dies except for the powder thru die. The .40 and .45 just add too much flair or don't add enough. The 2 step DAA is perfect. The casing has a step for bullet to sit squarely in the mouth and it gives a perfect amount of expansion and NO flare. A must have for 9mm, 40 and 45. I now just need the 9mm and I am good to go. These are perfect for the bullet to stay in the case with auto feed and indexing.A must have!!!
Tommie
Friday 18 May, 2018
Ordered the Double Alpha .40 caliber powder funnel for my .40 S&W cast lead bullets and am tickled with the fact that after rim expansion when my cast bullets drop from my Hornady Bullet Feed Die they drop perfectly straight and seat deep within the case mouth. If an occasional leaning bullet on the case mouth occurs it is not due to the funnel flare but to due the bullet feeder release while dropping the bullet. Couldn't be happier. LHB
LH B***r
Sunday 13 May, 2018
I bought this to expand for cast bullets. Works great! Use it for 9mm and 357 and couldn't be happier.
Blove12
Wednesday 07 February, 2018
Excelent product. Thanks DoubleAlpha for your speed order send!
Arcebac
Wednesday 03 January, 2018
It works better than the Dillon but it did not go deep enough for my use. Sometimes the bullet falls off
Right before it bells the case the funnel is enlarged. But the enlarged portion was not deep enough. I will
put it in a lathe and extend the .358 portion of the expander another 5 or 10,000ths.
Syd H***n
Wednesday 27 December, 2017
Funnel put just the right bell so the bullet drop right in without tipping on rotation. Its a must have with the Mr. Bulletfeeder. The Original do not work as good.
David
Monday 17 July, 2017
This funnel is one off the best products you can buy for your Dillon press. The bullets stay on the case no matter how fast I run the press, just make sure you use case lube so to reduce cases sticking to funnel.
Pat C***o
Monday 17 April, 2017
Works good. I don't have a bullet feeder yet (am saving to get one) but i needed a powder funnel for my quick chage kit wich i use to switch between relaoding standard 9x19 and 9x21 ammunition
Vincent
Wednesday 15 March, 2017
Had read many good things about this product on Dillon 650 and finally pulled the trigger. It works great with a Redding Dual Ring Sizer. I was concerned about a suction on the powder funnel but there is not much. The bottom portion of the funnel that engages the brass is finished slightly rough so the surface keeps some dirt on it which I think helps reduce the suction. I will order one for 9mm and 45 soon.
mk
Tuesday 24 January, 2017
Je recharge 4 calibres (9x19, 38SA, 40Q&W et 45ACP) avec les funnels DAA depuis quelques temps maintenant, la qualité et la précision sont toujours identiques. Je les trouve plus efficace que la version Dillon d'origine, même si on ne possède pas de Bullet Feeder.
Guillaume B***N
Friday 25 March, 2016
Permette l'inserimento della palla in modo sicuro e stabile. Ottimo
Paolo Z***a
Thursday 17 March, 2016
Got the powder funnel for 9mm and 40S&W reloads and it works so much better then what came with my Dillon XL 650, plan to order the 45 one soon too.
Robert M***y
Thursday 07 January, 2016
Was having some trouble with the cases slightly hanging up on the down stroke. You could feel it in the lever.
I polished the funnel up and it got rid of almost all of it. Applied some One Shot on the cases and you could not even feel them going in or out of the funnel.
These things work awesome for prepping the cases for bullets, no more tipping at all !
Steve
Monday 07 December, 2015
I found this funnel on the DAA website and ordered it right away. My bullets kept tipping off after indexing using the existing Dillon expander, but after replacing it with the DAA powder funnel, I've loaded approx 1000 rounds now with it and not one bullet has fallen off.
Totally recommend this to anyone using a bullet feeder on their XL 650, Worth every penny.
Cheers,
Matt
Matt