Thursday 31 March, 2022
I put off buying one of these for a very long time because they are pricey, but I finally decided to treat myself and am so glad I did. The initial setup and tuning is a little tedious but the instructions provided instructions are good. Once it's running smoothly the MBF makes a huge difference in loading efficiency. I knew I was losing some time manually placing bullets but I could still load about 500rds/hr comfortably on my 650, which I thought was fine. With the MBF set up I can comfortably load 8-900/hr; it's a massive quality of life improvement and I'm already considering purchasing a conversion kit for .223.
We can't do half stars here but I would take off a half star because I think DAA can make some design changes to make adjustments easier, specifically getting the angle of the MBF body right when it's on the press and the retention/adjustment method for the bullet flip ramp.
Saturday 19 March, 2022
This the third Mr. Bulletfeeder I have purchased from DAA. All have preformed fantastic. The most recent purchase was to replace the second one I purchased as it was destroyed in the Marshal Fire in Bolder CO. The first one has been in operation for three years with no issues! Great Product!
Wednesday 09 February, 2022
AWESOME once you get it set up. Double Alpha customer service was top notch around this. Josh over there has machines of his own and walked me through readjustment of the bearings / clip the way that he uses it and boom-- this is probably my favorite reloading accessory
Thursday 27 January, 2022
Having owned one for a year let me say this equipment does not like lead 9mm bullets and does not digest them well, but after going with jacketed bullets it has worked well, originally bought for 223 bullets, what a nightmare that was, have given up on using this to load 223-55 grain bullets, even DA said it was the most difficult bullet to get it set up for- that should be a BIG side note listed on there website- I hope they do more development to make it more compatible with 223, im sure with bigger and heavier bullets it works good. At the end of the day I will say it does work well with the 9mm 115gr jacketed bullets I'm using.
Saturday 01 January, 2022
Another superlative product from DA. The powder funnel affects the bullet dropper setting. Once you figure that out it’s very reliable. I’ve used plated and polymer coated bullets with great success. You may need to adjust spring length. I had to find the correct place on the case feeder and cut about an inch off the spring. I use it on the XL750.
Wednesday 13 October, 2021
Takes awhile to set up, but ounce it's set up reloading is much easier and faster, I have two on different presses and really happy with them
Tuesday 12 October, 2021
I have purchased Mr Bulletfeeder as part of a bundle with xl750. With very small adjustments I have managed to achieve 100% proper bullets feeding.
Wednesday 11 August, 2021
Excelent quality, easy to use and very reliable. 1 of 1000 Bullets come in the "wrong direction".
Christian Seitz - Setronic G***H
Tuesday 06 July, 2021
XLNT products with a very fair price and if you wait for holiday sales the prices get even better. The quality is very good and the shipping is fast and fair,gotta love FAIR.Thank you Double Alpha!
Monday 05 July, 2021
Works as it should. A little touchy to adjust for bullet weight and shape, but flawless once dialed in. Drop tube is easy to adjust.
Monday 19 April, 2021
As it says in the video, you need to adjust the angle of the machine and the bullet orientation mechanism to suit your bullet. Fiddly but not difficult.
Once you have got these right, it's great.
Anyone shooting a lot, will benefit greatly from this little machine.
Thursday 04 March, 2021
I told my wife I bought mine to speed up my reloading so I could spend more time with her. We've been married for almost 42 years so she didn't believe me! When I got my Mr. BF I had my 750 but no case feed so I really took my time and set the die assembly and tube perfectly. That was easy and when the case feed came I bolted it on and it was off to the races. Everyone talks about fast and easy. It was and it is. But I believe that accuracy is enhanced by the bullets being set straight in to the flared case mouth. I always tried to be careful when putting the bullet into the case by hand but Mr. BF makes it fast, easy AND accurate. My confidence in my reloads really went up a lot. Now if I could just get some primers! Alex Ragulsky
Monday 08 February, 2021
Can't believe i loaded on a dillon for 30 years without one, amazing increase in loading speed
Thursday 07 January, 2021
One of the best purchases I have made for my dillon reloading machine. I'll admit I was skeptical at first. But after having purchased one in 9mm, a week later I bought a conversion kit for 45ACP. As long as you set it up correctly, this thing works like a charm. I'm very happy so far with my purchase and plan on getting more conversion kits for the various other calibers that I reload for.
Saturday 02 January, 2021
The bullet feeder works great, I have already produced over 2000 rounds.
I don't know how I was able to work without the bullet feeder until now.
I would never give it away.
Friday 25 December, 2020
A great product, easy to install with very explanatory instructions and tutorials. With the case feeder it is a perfect match and reloading becomes pleasant and very, very fast.
The best purchase made in recent years, I wonder how I managed to do without it for so long!
Friday 11 December, 2020
Negative reviews on the Mr. bullet feeder are based on your failure to adjust the machine correctly. Adjust the nose plate, easy to do with a screw driver, adjust plate in or out so it will guide the tip, pay attention to the base of the bullet, to far in will cause it to flip all bullets. Don't have any tension on the drop spring tube, will cause drop tube to double feed or dump them all. Videos on the machine are available, You Tube and Double Alpha. For the Hornady guy's, you will need to extend the hanger bracket so there is no tension on the spring tube for proper bullet dropper tube function, simple to do with flat stock of your choice with 2 holes to drill and by the way the Hornady bullet feeders suc k, you guy's know what I'm talking about. Bottom line if you want to reload fast get one.
Wednesday 18 November, 2020
ottimo prodotto, ho solo variato il montaggio installando una staffa di rinforzo fra la vite di fissaggio del motore e la vite di fissaggio del supporto dell'alimentatore di bossoli sul telaio della pressa, perchè altrimenti l'eccessivo peso dell'alimentatore di palle con all'interno le palle, sforzava troppo sul bordo della plastica dell'alimentatore di bossoli.
Monday 16 November, 2020
Can’t believe I waited so long to get this. Had a little trouble at first but once dialed in it was great
Thursday 12 November, 2020
Should have done this years ago. Is an investment but definitely worth the money. Followed the setup manual and with a little tweeking it works nicely. No problems yet with bullets or otherwise. Happy user.