In stock
$138.85
Choose options
We Also Recommend
$54.95

Latest reviews

Monday 09 February, 2015
I have to say that the mr bullet feeder has been one of the best things that I have bought recently works as promised no mucking about.......excellent
Rating: (5 of 5 Stars!)
Wednesday 10 December, 2014
Veramente ottimo, il sistema a sfere è semplicissimo e l'installazione richiede solo 10 minuti.
Rating: (5 of 5 Stars!)
Tuesday 02 December, 2014
I've now loaded about a thousand rounds of .38 special and 9mm combined, with both lead and jacketed bullets. The machine I'm using is the Hornady Lock-n-Load progressive, First let me say that I'm very happy with the Mr. Mini it has made the job so much easier, the projectiles get a light tap...
Rating: (5 of 5 Stars!)
Friday 01 August, 2014
Ottimo per semplicità di installazione e funzionamento. Buono il rapporto qualità / prezzo.
Rating: (5 of 5 Stars!)
Wednesday 23 July, 2014
Sehr geniales Geschossmagazin zum setzen der Geschosse in meiner Dillon XL 650
Rating: (5 of 5 Stars!)
Friday 11 April, 2014
A real simple thing to use ! Everything is faster now. Works on a Lee turret press too as well as on a Load Master. No room enough on a Lee Pro 1000, though.
Rating: (5 of 5 Stars!)
Monday 24 March, 2014
Perfecto, da gusto no tener que poner las puntas a mano!
Rating: (5 of 5 Stars!)
Saturday 15 March, 2014
Works great! I'm loading .40 S&W on a Lee Load-Master using this bullet-feeder and it has been functioning flawlessly. Just don't try to lift the feed tubes off the die while it's still full of bullets, you'll spill them everywhere!
Rating: (5 of 5 Stars!)
Saturday 01 February, 2014
SAUL....IT WORKS GREAT!!!! I AM USING IT ON THE DILLION RL 1050,LOADING 9mm,40 SW AND SIG 357. WITH THE TUBES PRELOADED I CUT LOADING TIME IN NEARLY 1/2. IN ADDITION ,THE OAL OF THE ROUNDS HAS FLATTED OUT TO BE WITHIN +/_.001".I FEEL THE PRIMARY CAUSE OF THIS IMPROVED OAL READING IS BECAUSE OF...
Rating: (5 of 5 Stars!)
Sunday 19 January, 2014
super++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Rating: (5 of 5 Stars!)
Wednesday 08 January, 2014
What a fantastic simple little device. For once I followed instructions and setup case flare as instructed. This little gadget works a treat on my XL650, just crank the handle and watch the projectiles drop into place. Get a few spare projectile tube assemblies to fill up whilst watching TV then...
Rating: (5 of 5 Stars!)
Thursday 12 September, 2013
I am reloading 9mm and 38super on a hornady l&l progressive press. I don't have a case feeder so I have to place an empty case with my left hand every cycle. To place a bullet i had to take my right hand of the press lever and place the bullet. Now with the bullet feeder i can keep my hand...
Rating: (5 of 5 Stars!)
Friday 09 August, 2013
Hi, I got my "Mr. Mini" this morning. Unpack and after 30 minutes up and running... flawless! Great product for a fair price TIP: Like in the manual is written, clear out the press of all its powder, primers and cases before starting to install…. You need to adjust and make a number of tests...
Rating: (5 of 5 Stars!)

DAA Mini Mr. Bulletfeeder - Pistol

(53)
Manufacturers: Double-Alpha Academy

Description:

Please note:

The current design of the new XL750 does not allow the bullet dropper to be positioned in station #4 of the toolhead because of the angle at which the powder Dispenser bar extends directly towards it. This means the bullet dropper MUST be positioned immediately after the powder dropper, in station #3. That makes it impossible to use a Powder-Check AND a bullet dropper at the same time.

We will attempt to come up with a solution to allow the powder dropper to be rotated to another angle to resolve this issue, but at the moment, be aware of this issue.

Based on the success of the Mr. Bullet Feeder by DAA, DAA has now launched a new more economical version of the original Mr. Bullet Feeder.  The new Mini Mr. Bullet Feeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same reliable dropper die assembly as used on the Mr.Bulletfeeder by DAA.

Each magazine of bullet tubes needs to be manually filled by hand before reloading begins, similar to the way a primer tube is filled before starting the reloading process. After a little practice, it will take approximately 2 minutes to fill the tube assembly. This can be done in advance of the reloading process to save time.  Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting a reloading session.

While reloading, the bullets will drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue reloading without delay.

The Mini Mr.Bulletfeeder by DAA can be used on any progressive reloading machine which uses the same size dies as Dillon, however please note that the powder funnel supplied with the Mini Mr.Bulletfeeder by DAA is designed to be used ONLY in the Dillon powder drop! If you wish to use the Mini Mr.Bulletfeeder by DAA with another press, you may need to purchase elsewhere another powder funnel to expand the brass.

NOTE: That the bullet feeder does require a station on the tool head, direcly after the powder dropper.

DAA has found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to be with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050

The Mini Mr. Bulletfeeder includes:

1 x 6-Tube Bullet Magazine Assembly
1 x Dropper Die Assembly
1 x Expanding powder funnel (Dillon compatible)
3 x Spare Steel Ball-Bearings for Dropper
1 x User Instruction Sheet

Please note: Mr.Bullet feeders and Mini Mr.BF are usually shipped with our Dillon Powder funnel. If you wish us to swap that out for a Hornady funnel when shipping – we can do so for you. request that at time of ordering. Or, separately purchase your Hornday expanding powder funnel here

Click here for user instructions for this and other products.

Reviews (53)

Monday 09 February, 2015
I have to say that the mr bullet feeder has been one of the best things that I have bought recently works as promised no mucking about.......excellent
Wednesday 10 December, 2014
Veramente ottimo, il sistema a sfere è semplicissimo e l'installazione richiede solo 10 minuti.
Tuesday 02 December, 2014
I've now loaded about a thousand rounds of .38 special and 9mm combined, with both lead and jacketed bullets. The machine I'm using is the Hornady Lock-n-Load progressive, First let me say that I'm very happy with the Mr. Mini it has made the job so much easier, the projectiles get a light tap into the case and are perfectly straight so there is no problem with them shaking out between stages. The Mr. Mini came with a powder through case expander witch is beautifully finished and specially designed to provide exactly the right amount and shape of expansion for the bullets to sit in, I wish that I could use it but unfortunately it is made to fit a Dillon powder thrower, if they ever come out with one to fit the Hornady I will certainly get it. The Mr. Mini can be improved, 1) it could do with a micro switch beeper to let you know that it's time to rotate to the next tube, this should be an optional extra for those that can afford it, and 2) on a couple of occasions when there was just 4 or 5 bullets to go the body of the feeder got stuck on the up stroke and released all the remaining bullets at once, I'm dealing with this by placing a small lead weight on top of the unit to keep it heavy enough to always slide down like it should. Overall I would and in fact have recommended this bullet feeder to my friends.
Friday 01 August, 2014
Ottimo per semplicità di installazione e funzionamento. Buono il rapporto qualità / prezzo.
Wednesday 23 July, 2014
Sehr geniales Geschossmagazin zum setzen der Geschosse in meiner Dillon XL 650
Friday 11 April, 2014
A real simple thing to use ! Everything is faster now. Works on a Lee turret press too as well as on a Load Master. No room enough on a Lee Pro 1000, though.
Monday 24 March, 2014
Perfecto, da gusto no tener que poner las puntas a mano!
Saturday 15 March, 2014
Works great! I'm loading .40 S&W on a Lee Load-Master using this bullet-feeder and it has been functioning flawlessly. Just don't try to lift the feed tubes off the die while it's still full of bullets, you'll spill them everywhere!
Saturday 01 February, 2014
SAUL....IT WORKS GREAT!!!! I AM USING IT ON THE DILLION RL 1050,LOADING 9mm,40 SW AND SIG 357. WITH THE TUBES PRELOADED I CUT LOADING TIME IN NEARLY 1/2. IN ADDITION ,THE OAL OF THE ROUNDS HAS FLATTED OUT TO BE WITHIN +/_.001".I FEEL THE PRIMARY CAUSE OF THIS IMPROVED OAL READING IS BECAUSE OF THE COMBINATION OF THE POWDER EXPANDER AND THE BULLET DROPPER. THANKS LARRY 1/31/2014
Sunday 19 January, 2014
super++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Wednesday 08 January, 2014
What a fantastic simple little device. For once I followed instructions and setup case flare as instructed. This little gadget works a treat on my XL650, just crank the handle and watch the projectiles drop into place. Get a few spare projectile tube assemblies to fill up whilst watching TV then you're set to rocket through the next reloading session.
Thursday 12 September, 2013
I am reloading 9mm and 38super on a hornady l&l progressive press. I don't have a case feeder so I have to place an empty case with my left hand every cycle. To place a bullet i had to take my right hand of the press lever and place the bullet. Now with the bullet feeder i can keep my hand on the lever and keep reloading as fast as i can place an empty shell case. This speeds up the reloading considerably. So far i had no problems and everything works as advertised.
Friday 09 August, 2013
Hi, I got my "Mr. Mini" this morning. Unpack and after 30 minutes up and running... flawless! Great product for a fair price TIP: Like in the manual is written, clear out the press of all its powder, primers and cases before starting to install…. You need to adjust and make a number of tests to be sure all is working well. Pro's: - As always quick delivery (1day after ordering) - Easy to setup, not too difficult if you already are known with Dillon machines. - It is indeed a step less in handling and significantly speeds up the reloading process. - When correct setup, 99,9% feeding a bullet. Cons: - The clamp to "free" the tube is not the best design. Difficult to grab, you will lose it quickly, so a small chain to keep it with the tubes would be nicer, like 2 or 3 spares. - Easy to forget the clamp before reloading. First time al bullets fell on the floor when picking up the just loaded tubes. - With a powder check installed on a XL650 it is difficult to see if a tube is empty. - Price-performance of the product is a max. Overall : Absolute MUST to have for the serious reloader!
General questions

Q: Will the mini Mr. Bullet Feeder work with lead cast, polymer coated bullets? Specifically .40 cal. (.401 diameter)?

Yes, as long as they are not full wadcutters.

Q: I would like to know if your mini...

Also Available In Set(s)

You may also be interested in