In stock
$138.85
Choose options
We Also Recommend
$54.95

Latest reviews

Monday 11 December, 2017
Hey ! I add mini mr.bullet feeder to my L&L hornady press and it fits no probem!
Rating: (5 of 5 Stars!)
Tuesday 17 October, 2017
I received this item in two days!!! Gee, this thing works great!! Installing and setting it up was easy. I know that I still need to manually load the tubes but once its done, reloading goes fast. I was thinking about getting some spare tubes but my arm gets tires so quickly, I want to rest and...
Rating: (5 of 5 Stars!)
Sunday 24 September, 2017
The DAA mini bullet feeder is a great addition to my Lee Loadmaster. I've tried other feeders only to be disappointed by poor quality and endless adjustments. I set mine up in a matter of minutes it works perfectly. i'm using it for 9mm and have had zero problems. It is well made using steel...
Rating: (5 of 5 Stars!)
Saturday 09 September, 2017
Semplice installare l'accessorio. Estremamente funzionale e straordinarii il tempo che viene risparmiato. Assolutamente da acquistare per completare la Dillon.
Rating: (5 of 5 Stars!)
Sunday 23 July, 2017
Already my third one, very easy in use together wit the quick change kit. Now hoping for the mini case feeder to come soon also for .45ACP.....
Rating: (5 of 5 Stars!)
Monday 19 June, 2017
Love it. Gets plenty of bullets but not so much that you are cranking out hundreds of rounds at the expense of your shoulder, elbow, wrist, etc... When it comes time to refill the bullets you should have a seat, grab an iced tea, and fill'r up. I love the flawless seating of the bullet. takes the...
Rating: (5 of 5 Stars!)
Saturday 18 March, 2017
This is the second bullet feeder I have purchased and both work very well. Just be careful when installing it and follow the directions or you can dump bullets onto the floor. I use a Dillion 550B.
Rating: (5 of 5 Stars!)
Thursday 02 February, 2017
Great alternative to the motorized versions at a fraction of the price. Works flawlessly.
Rating: (5 of 5 Stars!)
Tuesday 03 January, 2017
Great item. I use it together with mini case feeder and quick change kit to swap between .38Supercomp and .357Magnum. No noise af ratling bullets. Works very good, sometimes no bullet falls, so always keep attention when reloading. Makes reloading very easy and fast.
Rating: (5 of 5 Stars!)
Tuesday 01 November, 2016
I purchased the mini bullet feeder because it was in my price range. With fine tuning for length, crimp and powder load it took about an hour! The unit holds more 9mm bullets than my 100 primers in the primer tube. It takes about 5 minutes to load the bullets but everything is on auto pilot from...
Rating: (5 of 5 Stars!)
Thursday 01 September, 2016
It took 30 minutes or less to setup and use, and work very very well. I have a Dillon 650xl and am new to reloading but the mini Mr.Bulletfeeder was a snap to setup and use. Thanks for a great and reasonable priced product!
Rating: (5 of 5 Stars!)
Monday 29 August, 2016
I finally got my reloading table back together and my Hornady LNL Press up and running. The Mini Mr.Bulletfeeder is a great addition to the press, it saves a lot time. Most of my reloading is for Cowboy Action Shooting so the I use cast lead bullets with a lube and the Mini Mr. Bulletfeeder works...
Rating: (5 of 5 Stars!)
Tuesday 24 May, 2016
EXCELLENT ITEM I\'M VERY SATISFIED.
Rating: (5 of 5 Stars!)
Tuesday 29 March, 2016
Excellent product! Easy to install and use. I personally don't mind filling the tubes before a reloading session. It does take some time yes.. but I find it better spend before then during reloading. I use a Dillon 550 and I have a better flow in checking the powder charge and indexing the...
Rating: (5 of 5 Stars!)
Tuesday 15 March, 2016
Terrific product. Had a couple of questions regarding installation and DAA customer service was outstanding. They responded immediately and resolved my issues.
Rating: (5 of 5 Stars!)
Saturday 20 February, 2016
One of the best reloading products I've ever bought. I only wish I would have bought it earlier. I will be purchasing bullet feeders in 223 and 9mm soon.
Rating: (5 of 5 Stars!)
Monday 01 February, 2016
Excellent produit, transaction parfaite, livraison rapide, simple et efficace !
Rating: (5 of 5 Stars!)
Wednesday 20 January, 2016
The mini Mr. bullet feeder has got to be the best addition for the progressive reloader without spending a lot of cash. I bought the 9mm with 2 additional magazines and loved it so much I bought another for .223
Rating: (5 of 5 Stars!)
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Rating: (5 of 5 Stars!)
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Rating: (5 of 5 Stars!)

DAA Mini Mr. Bulletfeeder - Pistol

(53)
Manufacturers: Double-Alpha Academy

Description:

Please note:

The current design of the new XL750 does not allow the bullet dropper to be positioned in station #4 of the toolhead because of the angle at which the powder Dispenser bar extends directly towards it. This means the bullet dropper MUST be positioned immediately after the powder dropper, in station #3. That makes it impossible to use a Powder-Check AND a bullet dropper at the same time.

We will attempt to come up with a solution to allow the powder dropper to be rotated to another angle to resolve this issue, but at the moment, be aware of this issue.

Based on the success of the Mr. Bullet Feeder by DAA, DAA has now launched a new more economical version of the original Mr. Bullet Feeder.  The new Mini Mr. Bullet Feeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same reliable dropper die assembly as used on the Mr.Bulletfeeder by DAA.

Each magazine of bullet tubes needs to be manually filled by hand before reloading begins, similar to the way a primer tube is filled before starting the reloading process. After a little practice, it will take approximately 2 minutes to fill the tube assembly. This can be done in advance of the reloading process to save time.  Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting a reloading session.

While reloading, the bullets will drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue reloading without delay.

The Mini Mr.Bulletfeeder by DAA can be used on any progressive reloading machine which uses the same size dies as Dillon, however please note that the powder funnel supplied with the Mini Mr.Bulletfeeder by DAA is designed to be used ONLY in the Dillon powder drop! If you wish to use the Mini Mr.Bulletfeeder by DAA with another press, you may need to purchase elsewhere another powder funnel to expand the brass.

NOTE: That the bullet feeder does require a station on the tool head, direcly after the powder dropper.

DAA has found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to be with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050

The Mini Mr. Bulletfeeder includes:

1 x 6-Tube Bullet Magazine Assembly
1 x Dropper Die Assembly
1 x Expanding powder funnel (Dillon compatible)
3 x Spare Steel Ball-Bearings for Dropper
1 x User Instruction Sheet

Please note: Mr.Bullet feeders and Mini Mr.BF are usually shipped with our Dillon Powder funnel. If you wish us to swap that out for a Hornady funnel when shipping – we can do so for you. request that at time of ordering. Or, separately purchase your Hornday expanding powder funnel here

Click here for user instructions for this and other products.

Reviews (53)

Monday 11 December, 2017
Hey ! I add mini mr.bullet feeder to my L&L hornady press and it fits no probem!
Tuesday 17 October, 2017
I received this item in two days!!! Gee, this thing works great!! Installing and setting it up was easy. I know that I still need to manually load the tubes but once its done, reloading goes fast. I was thinking about getting some spare tubes but my arm gets tires so quickly, I want to rest and enjoy reloading the tubes!! AND my case gage failure rate went down from about 10% to ZERO!! I now know the root cause for the high failure rate - a crooked bullet in the case. I had been using the MBF funnel but my bullet alignment must have been off. This unit does it a lot more accurately. Thank you and thank you for providing this great product. This this should come with every reloading machine like the gas and brake pedal in cars!!
Sunday 24 September, 2017
The DAA mini bullet feeder is a great addition to my Lee Loadmaster. I've tried other feeders only to be disappointed by poor quality and endless adjustments. I set mine up in a matter of minutes it works perfectly. i'm using it for 9mm and have had zero problems. It is well made using steel balls in the collar, no plastic. This feeder speeds up the loading process greatly, it also gives me one less thing to worry about.Great product-well made would definitely recommend to anyone reloading.
Saturday 09 September, 2017
Semplice installare l'accessorio. Estremamente funzionale e straordinarii il tempo che viene risparmiato. Assolutamente da acquistare per completare la Dillon.
Sunday 23 July, 2017
Already my third one, very easy in use together wit the quick change kit. Now hoping for the mini case feeder to come soon also for .45ACP.....
Monday 19 June, 2017
Love it. Gets plenty of bullets but not so much that you are cranking out hundreds of rounds at the expense of your shoulder, elbow, wrist, etc... When it comes time to refill the bullets you should have a seat, grab an iced tea, and fill'r up. I love the flawless seating of the bullet. takes the dexterity game out of loading.
Saturday 18 March, 2017
This is the second bullet feeder I have purchased and both work very well. Just be careful when installing it and follow the directions or you can dump bullets onto the floor. I use a Dillion 550B.
Thursday 02 February, 2017
Great alternative to the motorized versions at a fraction of the price. Works flawlessly.
Tuesday 03 January, 2017
Great item. I use it together with mini case feeder and quick change kit to swap between .38Supercomp and .357Magnum. No noise af ratling bullets. Works very good, sometimes no bullet falls, so always keep attention when reloading. Makes reloading very easy and fast.
Tuesday 01 November, 2016
I purchased the mini bullet feeder because it was in my price range. With fine tuning for length, crimp and powder load it took about an hour! The unit holds more 9mm bullets than my 100 primers in the primer tube. It takes about 5 minutes to load the bullets but everything is on auto pilot from then on. Just need to keep an Eye on the unit to make sure you continue to feed bullets. I like the product and will most ikely buy more feeders for serious reloading sessions.
Thursday 01 September, 2016
It took 30 minutes or less to setup and use, and work very very well. I have a Dillon 650xl and am new to reloading but the mini Mr.Bulletfeeder was a snap to setup and use. Thanks for a great and reasonable priced product!
Monday 29 August, 2016
I finally got my reloading table back together and my Hornady LNL Press up and running. The Mini Mr.Bulletfeeder is a great addition to the press, it saves a lot time. Most of my reloading is for Cowboy Action Shooting so the I use cast lead bullets with a lube and the Mini Mr. Bulletfeeder works great.
Tuesday 24 May, 2016
EXCELLENT ITEM I\'M VERY SATISFIED.
Tuesday 29 March, 2016
Excellent product! Easy to install and use. I personally don't mind filling the tubes before a reloading session. It does take some time yes.. but I find it better spend before then during reloading. I use a Dillon 550 and I have a better flow in checking the powder charge and indexing the plate. I load up three sets of tubes and three sets of primer tubes for a session. That's perfect for a reloading session for me.
Tuesday 15 March, 2016
Terrific product. Had a couple of questions regarding installation and DAA customer service was outstanding. They responded immediately and resolved my issues.
Saturday 20 February, 2016
One of the best reloading products I've ever bought. I only wish I would have bought it earlier. I will be purchasing bullet feeders in 223 and 9mm soon.
Monday 01 February, 2016
Excellent produit, transaction parfaite, livraison rapide, simple et efficace !
Wednesday 20 January, 2016
The mini Mr. bullet feeder has got to be the best addition for the progressive reloader without spending a lot of cash. I bought the 9mm with 2 additional magazines and loved it so much I bought another for .223
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
Saturday 28 March, 2015
Great product. I added it to my dillion 650XL in station 4..I station 6 I added the Lee bullet seating and crimping die. Bullet feeder makes it very easy to load. I can load 100 rds of 9mm in about 15 minutes.
General questions

Q: Will the mini Mr. Bullet Feeder work with lead cast, polymer coated bullets? Specifically .40 cal. (.401 diameter)?

Yes, as long as they are not full wadcutters.

Q: I would like to know if your mini...

Also Available In Set(s)

You may also be interested in