Currently out of Stock
$9.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Add to Cart
Choose options
We Also Recommend
$8.50
$8.50

Latest reviews

Monday 19 September, 2022
used in STI 1srt gen 40SW , with DAA springs 11 coils, installation without troubles, shoot without jamming
Rating: (5 of 5 Stars!)
Thursday 07 October, 2021
Will not work in a Para 16-40 mag with a Dawson extended base pad .when you get 19 rounds in one round will pass by the follower and get stuck in the spring.
Rating: (1 of 5 Stars!)
Wednesday 27 February, 2019
I bought this product but it does not work in BUL SAS 2, the last two cartridges block the slide pistol
Rating: (1 of 5 Stars!)
Tuesday 01 January, 2019
Used with Gen2 STI tubes and base pads.
Works flawlessly and didn’t not have a single malfunction despite the following issues I noticed.

TRIM THE SLIDE LOCK LEVER TAB OFF OF THE FOLLOWER WHEN USING A NITROFIN THUMB REST
The spring/follower combo is not strong enough to engage the NITROFIN...
Rating: (4 of 5 Stars!)
Wednesday 11 April, 2018
Another excellent product,fitted with DAA springs a perfect match
Rating: (5 of 5 Stars!)
Friday 11 November, 2016
I use these in combination with a DAA base pad and 11 coil spring for an STI in 40cal shooting production. The full combination raises the magazine capacity from 14 to 17.

With an unmodified slidestop, the follower caused the slide to stay open with one round still in the mag (on a stock...
Rating: (4 of 5 Stars!)
Wednesday 19 October, 2016
Wonderful quality, fast delivery and excellent service!
Rating: (5 of 5 Stars!)
Wednesday 28 October, 2015
Sadly they were a little bit to slim for my STI legend magazines. Good product though.
Rating: (4 of 5 Stars!)
Friday 23 October, 2015
Nice Follower that sits firmly on the DAA 2011 Mag spring - Similar to, but not as tall as the Grams Engineering follower.
Rating: (5 of 5 Stars!)
Thursday 15 October, 2015
The new DAA follower and mag spring are performing flawlessly in my magazines for a couple of weeks now. The capacity remained the same as with the Grams kit, but it is now so much easier to obtain the replacement (being a EU resident US imports are a nightmare). At this stage its difficult to...
Rating: (5 of 5 Stars!)

DAA 2011 38/40 Follower

(10)
Manufacturers: Double-Alpha Academy

Description:

** Please note: the followers are now machined from BLACK Delrin

The DAA 2011 followers are designed to maximize capacity and reliability in all types of 2011 magazines. They have been tested and used in both 38 and 40 caliber mags, from STI, SVI, BUL, Para, Rescomp and others. These followers are precision CNC machined from Delrin, a self-lubricating material which ensures slick and reliable feeding in the mag tubes.

The low profile requires the minimum amount of space possible. The undercut and looped attachment to the DAA mag springs, mean that these follower cannot lift off, separate or rotate off of their springs. Once you assemble them to the DAA spring – you will feel the difference in comparison to other similar designs. The DAA follower locks on much more firmly!

These followers are not designed to reliably activate your slide stop. They are best used in pistols in which the slide stop has been deactivated, as is commonly done by serious IPSC/USPSA shooters and gunsmiths.

The DAA 2011 Followers are best used with DAA 2011 mag springs, but can also be used with Grams or TTI springs. Other springs may require some custom fitting or may not be used at all with this follower.

- These Followers can be used in shorter 9mm mags as well (with spacer) by shortening 1.5-2.0mm off the back end.

 

DAA 2011 Followers can be purchased individually or cheaper in packs of 3 or 5 pieces. Select those options from the Attribute box.

Reviews (10)

Monday 19 September, 2022
used in STI 1srt gen 40SW , with DAA springs 11 coils, installation without troubles, shoot without jamming
Thursday 07 October, 2021
Will not work in a Para 16-40 mag with a Dawson extended base pad .when you get 19 rounds in one round will pass by the follower and get stuck in the spring.
Wednesday 27 February, 2019
I bought this product but it does not work in BUL SAS 2, the last two cartridges block the slide pistol
Tuesday 01 January, 2019
Used with Gen2 STI tubes and base pads.
Works flawlessly and didn’t not have a single malfunction despite the following issues I noticed.

TRIM THE SLIDE LOCK LEVER TAB OFF OF THE FOLLOWER WHEN USING A NITROFIN THUMB REST
The spring/follower combo is not strong enough to engage the NITROFIN THUMB REST, so the tab on the follower gets jammed on the lever causing the mag to get stuck.

Due to the slim design, loading the first round causes the follower to slide forward, sometimes past the mag tube. Make sure to push the follower back.

Inconsistent on being able to load +1. I’m sure this is not an issue with aftermarket basepads.
Wednesday 11 April, 2018
Another excellent product,fitted with DAA springs a perfect match
Friday 11 November, 2016
I use these in combination with a DAA base pad and 11 coil spring for an STI in 40cal shooting production. The full combination raises the magazine capacity from 14 to 17.

With an unmodified slidestop, the follower caused the slide to stay open with one round still in the mag (on a stock slidestop).
Also the follower is so thin that it sometimes migrates forward an causes the mag to jam in the mag tube.
I decided to modify the follower and grinded the left tip extension off to the thickest part of the follower. With this done, the mag feeds all bullets and the slide does not stay back any more (even on an unmodified slidestop). Also after this mod, the mag does not stick any more and drops freely without issues.

In short, for me after a small mod and some testing it is a great follower!
Wednesday 19 October, 2016
Wonderful quality, fast delivery and excellent service!
Wednesday 28 October, 2015
Sadly they were a little bit to slim for my STI legend magazines. Good product though.
Friday 23 October, 2015
Nice Follower that sits firmly on the DAA 2011 Mag spring - Similar to, but not as tall as the Grams Engineering follower.
Thursday 15 October, 2015
The new DAA follower and mag spring are performing flawlessly in my magazines for a couple of weeks now. The capacity remained the same as with the Grams kit, but it is now so much easier to obtain the replacement (being a EU resident US imports are a nightmare). At this stage its difficult to say how long will the spring remain fresh, hopefully it is made from quality metal.
You may also be interested in