In stock
$54.95
Reward Points
Each product you purchase earns you a certain amount of Reward Points (each Reward Point equals to a Dollar/Euro amount) which you can use on your next purchase.
Once you have accumulated some Reward Points you can choose to use it on your next purchase or keep saving it.
To use your Reward Points make sure you input the amount you wish to use (from your total accumulated amount) at the checkout process.
Reward Points cannot be transferred to another user and expire in 12 months unless new points are accumulated prior to the 12 month expiration date in which case the 12 months period resets.
The Reward Points are available to you for any future purchase on the DAA webshop.
Choose options

Latest reviews

Sunday 06 January, 2013
My thumbrest broke several weeks ago. After sending Saul a picture of the broken part I recieved a new part! I must say very good customer service!

Thx Saul!
Rating: (5 of 5 Stars!)
Wednesday 28 November, 2012
perfect fitt to my tanfoglio.
Good adjustable,very solid.
Quick delivery.
Rating: (5 of 5 Stars!)
Thursday 13 September, 2012
Erste Sahne verarbeitet. Hundert Prozent sein Geld wert!
Rating: (5 of 5 Stars!)
Tuesday 29 May, 2012
I have recently purchased the thumb rest. I used a costume made thumb rest up until now.
the installation was easy and fast, the product can be adjusted to various positions that are perfect for my grip.
Shipment was fast.
Another good perches from DAA.

Thanks Saul, Eli and Rob.
Rating: (5 of 5 Stars!)
Friday 06 January, 2012
I fitted this thumbrest onto my pre-drilled .40S&W Infinity. Good product,fits well, works well!

Thanks Saul!
Rating: (5 of 5 Stars!)
Friday 06 January, 2012
It's sturdy and has some level of adjustment.
It would be interesting if it could be inverted and be used in a lower position and be more suited for smaller hands.

You get a well construted and very important piece with this Thumb Rest. It's well worth the money.
Rating: (4 of 5 Stars!)
Monday 12 December, 2011
Another fantastic product from Double Alpha.
Installed in minutes.
I simply slipped a M4 nut over the end of the bolt. Cut the excess off the bolt and removed the nut. No messing around and a clean cut bolt.
The perfect finishing touch to my 1911.
Thanks Double Alpha
Rating: (5 of 5 Stars!)
Sunday 12 June, 2011
Fits perfect ot the c-more - holes. Helps evidently to find the right grip immediately after drawing and reducees muzzle-moving.

* Sometimes the - provided long - screws will have to be shortened.
* With a more backword position - for small handed shooters like me - you have to detach the...
Rating: (4 of 5 Stars!)
Wednesday 15 December, 2010
Nice quality.
Could make the mounting hole pattern different for more option. I have small hands, so I drilled up the two first wholes a little so that I could get it as far back as possible on my Tanfo Lim.Custom GK
But you then need to remove the slidestop with a Henning og EGW slidestop...
Rating: (4 of 5 Stars!)
Wednesday 26 May, 2010
The screws, when screwed to the end, interfere with the action on my pistol - Tanfoglio LC II. You have to file the crews in order for the pistol to function.

Also, I have small hands, and the thumb rest is a little too far for my reach.
Rating: (3 of 5 Stars!)
Monday 10 May, 2010
This thumbrest is very good, but a little bit too far forward! The screws that came with it are very handy.
Rating: (3 of 5 Stars!)
Wednesday 28 April, 2010
Saw it on my buddys gun and had to have one! Fully adjustable, will prob fit any size hand (thumb). Shipping was faaaast to Canada only 9 Days
Rating: (5 of 5 Stars!)
Friday 05 March, 2010
Does fit to Tanfoglio, except for the provided screws which are too long and block the action. Had to shorten them, not easy as they're tiny.
Tip for DAA to provide tailor-fit screws for Tang'f as well.
Rating: (4 of 5 Stars!)
Saturday 09 January, 2010
The DAA Adjustable Thumb Rest is possibly the next step in "must have" items for IPSC Standard Class guns.
The unit was easy to install and adjust to fit my left hand when holding my gun.
I tested the unit by shooting two identical guns with the same .40 S/W load....and the Thumb Rest equiped...
Rating: (5 of 5 Stars!)

DAA Adjustable Standard Thumb Rest

(34)
Manufacturers: Double-Alpha Academy

Description:

Due to popular demand, we are pleased to now offer our very successful Adjustable Thumb Rest, in a new, narrower configuration, especially designed to fit the box for Standard division shooters. The new paddle width is 11mm (down from 16mm) allowing a standard STI Edge to fit easily into the box with this Thumb Rest attached.

The DAA Adjustable Thumb-Rest allows you to do what no other will – to adjust both the angle and the position of your thumb-rest with just a turn of a screw!

The benefits of mounting a thumb-rest on the pistol are well established, and many top shooters choose to use one on their competition guns. These are legal for both Open and Limited/Standard divisions, as long as the box restrictions are met.

The biggest problem, however, is deciding where exactly to mount the thumb-rest, and what angle will best suite your shooting grip. Once mounted, other thumb-rests are difficult or impossible to reposition, as the screw holes are already drilled into the frame. And why should you be limited to the elevation angle decided on by one manufacture or another? No longer! You can now adjust your thumb-rest as you like, experiment, and readjust as often as needed. Our unique original design allows for unlimited adjustments within a range of about half an inch, and these adjustments can be done without removing the thumb-rest from the frame. You can adjust the paddle even as the base remains locked in place.

The DAA Adjustable Thumb-Rest is available with either a light grey or Black Hard Anodize finish.

Reviews (34)

Sunday 06 January, 2013
My thumbrest broke several weeks ago. After sending Saul a picture of the broken part I recieved a new part! I must say very good customer service!

Thx Saul!
Wednesday 28 November, 2012
perfect fitt to my tanfoglio.
Good adjustable,very solid.
Quick delivery.
Thursday 13 September, 2012
Erste Sahne verarbeitet. Hundert Prozent sein Geld wert!
Tuesday 29 May, 2012
I have recently purchased the thumb rest. I used a costume made thumb rest up until now.
the installation was easy and fast, the product can be adjusted to various positions that are perfect for my grip.
Shipment was fast.
Another good perches from DAA.

Thanks Saul, Eli and Rob.
Friday 06 January, 2012
I fitted this thumbrest onto my pre-drilled .40S&W Infinity. Good product,fits well, works well!

Thanks Saul!
Friday 06 January, 2012
It's sturdy and has some level of adjustment.
It would be interesting if it could be inverted and be used in a lower position and be more suited for smaller hands.

You get a well construted and very important piece with this Thumb Rest. It's well worth the money.
Monday 12 December, 2011
Another fantastic product from Double Alpha.
Installed in minutes.
I simply slipped a M4 nut over the end of the bolt. Cut the excess off the bolt and removed the nut. No messing around and a clean cut bolt.
The perfect finishing touch to my 1911.
Thanks Double Alpha
Sunday 12 June, 2011
Fits perfect ot the c-more - holes. Helps evidently to find the right grip immediately after drawing and reducees muzzle-moving.

* Sometimes the - provided long - screws will have to be shortened.
* With a more backword position - for small handed shooters like me - you have to detach the item before removing the slide-catch and disassembly of the gun. So you need to apply a removeable screw-securing (locktite) before every shooting activity.
* A type of construction that leaves the base-plate in place with a larger travel of the thumb rest, is suggested.
Wednesday 15 December, 2010
Nice quality.
Could make the mounting hole pattern different for more option. I have small hands, so I drilled up the two first wholes a little so that I could get it as far back as possible on my Tanfo Lim.Custom GK
But you then need to remove the slidestop with a Henning og EGW slidestop instead!
I also cut the adjusting screw a litte on the back side for allowing the full use of the thum paddel.
Wednesday 26 May, 2010
The screws, when screwed to the end, interfere with the action on my pistol - Tanfoglio LC II. You have to file the crews in order for the pistol to function.

Also, I have small hands, and the thumb rest is a little too far for my reach.
Monday 10 May, 2010
This thumbrest is very good, but a little bit too far forward! The screws that came with it are very handy.
Wednesday 28 April, 2010
Saw it on my buddys gun and had to have one! Fully adjustable, will prob fit any size hand (thumb). Shipping was faaaast to Canada only 9 Days
Friday 05 March, 2010
Does fit to Tanfoglio, except for the provided screws which are too long and block the action. Had to shorten them, not easy as they're tiny.
Tip for DAA to provide tailor-fit screws for Tang'f as well.
Saturday 09 January, 2010
The DAA Adjustable Thumb Rest is possibly the next step in "must have" items for IPSC Standard Class guns.
The unit was easy to install and adjust to fit my left hand when holding my gun.
I tested the unit by shooting two identical guns with the same .40 S/W load....and the Thumb Rest equiped showed significantly less muzzel rise and produced a tighter grouping of shots.
Now we can add the DAA Adjustable Thumb Rest to the list along with Steel Magwells,Fiber Optic Front Sights,Tungsten Guide Rods and Bo-Mar Adjustable sights
as MUST have items!
A great product and I think shows where IPSC is going.

DVC Carmine.