Multi Caliber Adaptor Set for DAA Mini XL 650 Case Feeder

Tagagawa
Double-Alpha Academy

DAA Adaptor set for Multi-Cal Mini XL650 Case Feeder

Mga pangunahing tampok

Pumili ng mga Opsyon

€10.00

€0.50 Mga puntos ng gantimpala

Dam.:

I-save para sa Mamaya

(7)

Nasa stock

Mga pinakabagong review

Ludgerus ***

10 May 2023

Das Passt genau. Hier wackelt nichts mehr und ein Ladevorgang bereitet Freude. man gar nicht mehr aufhören.

Rating: (5 ng 5 Star!)

Alan ***

27 Dec 2021

I have 2 of these, one for my .9mm and one for my .38 caliber tool heads. It works great on the DAA case feeder.
I can load about 150 .9mm and 80 .38 special at a time
I am also very happy with the loader bowl

Rating: (5 ng 5 Star!)

Jason ***

13 Dec 2021

I've purchased a large number of DAA products and accessories for my Dillon XL750 and they have all been excellent.....except for the Mini Case Feeder, specifically because of these adaptors. They are sized so small that even after sanding with a dremel I still had to use a hammer to get them...

Rating: (2 ng 5 Star!)

Thomas ***

1 Dec 2021

The product is made of typically tough and durable plastic. I reviewed this product before and was shot down by the AA team. The piece that connects the Dillon case feeder adapter to the AA multi barrel case feeder needed to be altered. The inside diameter was too small. AA said it was Dillon's...

Rating: (4 ng 5 Star!)

Daniel ***

8 Oct 2021

It works fine, but installation is more difficult than it needs to be. The adapter that mounts to the screw on the 750 should be threaded and the other portions shouldn't be a friction fit. It would be much easier if it was a screw clamp. The sanding to get things to fit seemed like an odd design.

Rating: (3 ng 5 Star!)

Joseph ***

22 Feb 2021

Mine came with the mini case feeder, however it was not threaded at all, so I used a 3/8"-24 tap to thread it onto the XL750 cam pin/rod. Like in the description I did have to dremel out both pieces and then sand them with sand paper a bit to smooth them out and to get it to get a good fit the...

Rating: (4 ng 5 Star!)

Iniirerekomenda rin namin

Selang DAA Adaptor para sa Multi-Cal Mini XL750 / XL650 Case Feeder

€10.00

Idagdag sa Basket

Deskripsyon:

Ang DAA Adaptor Set para sa Multi-Cal Mini XL750 / XL650 Case Feeder ay isang set ng dalawang bahagi na gawa sa fiber reinforced Nylon, na madaling i-assembly sa iyong Dillon XL750 / XL650 press at pinapayagan kang gumamit ng DAA Mini case feeder tube sa halip na isang buong blown Dillon automatic case feeder.

Ang adaptor set na ito ay binubuo ng dalawang bahagi:

Ang Support-Ring bahagi: Ang bahaging ito ay may tangkay na may butas, na iskrin sa ibabaw ng Dillon Camming Pin (tulad ng ipinakita sa larawan), kapag iskrin sa tamang anggulo, ang Dillon Casefeed adaptor (ng anumang kulay) ay maaring pumasok dito at ma-suportahan. I-skrew ito sa Dillon Camming pin hanggang sa abot ng kaya, at pagkatapos i-back out hanggang mabigyan ng tamang posisyon upang suportahan ang Casefeed Adaptor bahagi.

Ang Adaptor-Cap bahagi: Ang bahaging ito ay sumasakop sa itaas ng iyong caliber specific Casefeed Adaptor, at nagbibigay ng punto ng attachment kung saan maari mong iskrew ang DAA Tube Assembly, na may preloaded na iyong brass.

Ang bagong configuration na ito ay gumagamit ng orihinal na Dillon Casefeed Adaptor piece, ginagawa itong mas multi caliber at universal. Tandaan na ang ilang adjustment ay maaaring mangailangan dahil ang ilan sa mga Dillon Casefeed adaptor ay may kaunting mas malaking outer diameter. Sa ideal na sitwasyon, nais mong ang Casefeed Adaptor ay maaring mag-slide papasok at palabas ng Support-Ring bahagi, walang masyadong friction, ngunit walang kalansingan.