Shopping Cart
0 item(s) - €0.00
Combo: Dillon 650, Mark 7 650 Pro Autodrive and Mr.Bulletfeeder
€3,080.17
€3,005.79
Qty.:
Add to Cart
Tell a Friend
Send

Choose Options

Dillon XL650 with case feeder
Dillon XL650 with case feeder
Caliber
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
Caliber
Manufacturer: Dillon Precision Inc.
  • Dennis
    Date Added: Sunday 07 October, 2018
    A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
    Rating: (5 of 5 Stars!)
  • Jeff Kulbis
    Date Added: Thursday 09 August, 2018
    Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
    Rating: (5 of 5 Stars!)
  • MARTIN G SCHANER
    Date Added: Monday 07 May, 2018
    I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE REPLACING THE 9MM BULLET FEEDER WITH A NEW MR. BULLET FEEDER AND JUST JUNKING THE OTHER UNIT.
    Rating: (5 of 5 Stars!)
  • Lawrence Range
    Date Added: Wednesday 11 April, 2018
    Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over. Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube. I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.
    Rating: (5 of 5 Stars!)
  • Drew
    Date Added: Friday 06 April, 2018
    I bought a Mr BulletFeeder for my XL 650, to load 9mm for USPSA shooting. Once you finish fine tuning everything, it's an awesome addition. With the bullet feeder, my reloading has been considerably sped up. 10/10 would buy again. Make sure to read the directions, and take your time to get everything adjusted. Be prepared to fine tune it a bit.
    Rating: (5 of 5 Stars!)
  • Kimsan
    Date Added: Wednesday 27 December, 2017
    perfect gift to my self :-) easy to install and good youtube clips when trobleshooting/install Wonder why i did not buy it when i bought my 650. Worth the money :-)
    Rating: (5 of 5 Stars!)
  • Dave M
    Date Added: Saturday 07 October, 2017
    Great Product. Easy to install and really met all my expectations. Wish I would have purchased years ago. The videos you have posted are excellent. Thank you.
    Rating: (5 of 5 Stars!)
  • Paul VC
    Date Added: Friday 06 October, 2017
    bought this reloading machine as my first and probably also as my last one as it is so very good. I am loading .38 Super, .38Supercomp (you need another shell plate), .357Magnum and .45ACP. Perhaps an automatic bullet feeder should be a good option, however it makes a lot of noice (I witnessed this with a fellow shooter) and is quite expensive so I choose to buy the mini bulletfeeders from DAA for each caliber and it suits me well. Same for the automatic case feeder, to expensive and a loudly option, so I choose also to use the mini case feeders from DAA, however for .45ACP still not available, so...as soon they are I will buy one. Also while loading the case you have an extra check on the case. If you follow the instructions well of the included detailed manual, and you can get some practical information from colleague shooters, it is quite easy to assemble and start reloading with this 650. I use it now approx. 1 year and reload approx. 500 pcs every week (200 .38supercomp, 200 .357Magnum and 100 .45ACP). I also use the quick exchange kits, for each caliber one, so for each caliber all settings are kept and changing from one to another is quite simple. Also I use different powders and I don't have to empty and refill the reservoir each time. No mistakes with wrong fillings. One point that asks more work is when you change to .45ACP. You also have to change the primer assembly from small pistol primers to large pistol primers (I remember a time when there were .45ACP cases available with SP primers, however I couldn't find them any more). Until now, only one problem with the .357 Magnum mini case feeder which had a broken part (the base extend has broken off). However DAA immediately replaced it after I wanted to order a new one (even forgot to mention it could be warranty) for free as part of the warranty after they contacted me to ask why I needed this part as it was not normal to order it separately. Great supplier who thinks with me and not against me. Thanks for that. I am convinced that this is a very good reloading device for shooters who wants to reload weekly some hundreds of ammunition and also wants to change calibers every week. DILLON and DAA, TOP products.
    Rating: (5 of 5 Stars!)
  • Larry T Burkett
    Date Added: Friday 28 April, 2017
    I purchased the Mr.Bullet in 9mm directly from DAA and it worked so well I've purchased conversions in .40 S&W and .45acp. Extremely easy to set up and saves valuable time that I use for more shooting. I highly recommend the DAA Mr. Bullet bullet feeder.
    Rating: (5 of 5 Stars!)
  • Rob A.
    Date Added: Friday 31 March, 2017
    I recently purchased the Mr. Bulletfeeder and now I am wondering why I did not do this YEARS ago. Hands down the best investment you can make if you are a competitive shooter....TMBF takes the chore out of a quick 200-300 round reloading session, you can be done in minutes and then off to the range. I highly recommend a TMBF. As a side note when my BF arrived the collator plate where the bullets drop into the spring tube was broken..I called Customer service snapped a picture and one was in the mail on the next business day. Buy with confidence and you will not be disappointed in the product or CED!! Keep up the great work Respectfully Rob A.
    Rating: (5 of 5 Stars!)

Combo: Dillon 650, Mark 7 650 Pro Autodrive and Mr.Bulletfeeder

Combo: Dillon 650, Mark 7 650 Pro Autodrive and Mr.BulletfeederReviews: 4.9 of 5 Stars!(Current Reviews: 4.947)
3005.79In stock! Order now!

Get 90Euro off this great bundle:

1x Dillon 650 reloading press at the claiber of your choice

1x Mark7 650 Pro Autodrive

1x Mr.Bulletfeeder at the caliber of your choice

Showing: 1 - 5 of 47
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
Dennis
Date Added: Sunday 07 October, 2018
A great invention. Took about a little over a hour to set up, and adjust. Save a lot of time when reloading.
Rating: (5 of 5 Stars!)
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
Jeff Kulbis
Date Added: Thursday 09 August, 2018
Have a Dillon 650 and wanted to keep the powder check station so I bought the DAA 9mm crimp/seater die. I only taper crimp which the die did well, Once set up no problems at all, happy with the purchase.
Rating: (5 of 5 Stars!)
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
MARTIN G SCHANER
Date Added: Monday 07 May, 2018
I OWN TWO DILLON 650'S ONE FOR 9MM AND ONE FOR 45ACP. I PURCHASED THE MR. BULLET FEEDER FOR THE NEW 45 PRESS AND I MUST SAY IT IS THE GREATEST THING SINCE SLICED BREAD. I HAVE ANOTHER BRAND BULLET FEEDER ON THE 9MM PRESS WHICH DOES NOT PERFORM ANYWHERE NEAR THE MR. BULLET FEEDER. I MAY SOON BE REPLACING THE 9MM BULLET FEEDER WITH A NEW MR. BULLET FEEDER AND JUST JUNKING THE OTHER UNIT.
Rating: (5 of 5 Stars!)
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
Lawrence Range
Date Added: Wednesday 11 April, 2018
Great Product for Dillon 650. Looks better than the one I bought for a 1050 before DAA took over. Bullets hang up occasionally so I may need to bevel\polish the lower part of the feed tube. I wouldn't want to run a press without a bullet feeder - everthing just runs smoother and fast with it.
Rating: (5 of 5 Stars!)
Mr. Bulletfeeder by Double-Alpha - Pistol
Mr. Bulletfeeder by Double-Alpha - Pistol
Drew
Date Added: Friday 06 April, 2018
I bought a Mr BulletFeeder for my XL 650, to load 9mm for USPSA shooting. Once you finish fine tuning everything, it's an awesome addition. With the bullet feeder, my reloading has been considerably sped up. 10/10 would buy again. Make sure to read the directions, and take your time to get everything adjusted. Be prepared to fine tune it a bit.
Rating: (5 of 5 Stars!)
Showing: 1 - 5 of 47

Combo: Dillon 650, Mark 7 650 Pro Autodrive and Mr.Bulletfeeder

Full Name:
E-Mail Address:
Telephone Number
Country
Enquiry:
Double-Alpha Academy BV
Elzenweg 33b, 5144MB, Waalwijk
The Netherlands
Phone: +31 (0)416 660 464
Fax: +31 (0)416 392 040
E-mail: daa(at)doublealpha.biz