Mini Mr.BulletFeeder by DAA - Rifle

Double-Alpha Academy
Configure
Caliber
$129.95
Save for Later
$3.00 Reward points
(39)
 Item in Stock | Usually dispatched within 24 hours

Latest reviews

Nick ***
Thursday 14 November, 2019
Directions don't really relate to the rifle setup or using a 650 but figured it out. Kind of a pain to load, tube size being so close to lead size. Gonna try to chamfer the opening with a countersink bit
Rating: (5 of 5 Stars!)
Ronald ***
Monday 17 June, 2019
Great product will be ordering all calibers I reload!
Rating: (5 of 5 Stars!)
Jack ***
Thursday 23 May, 2019
Although I have very little experience with the Mr. BullerFeeder, I currently have it mounted on my Lee Auto Breech Lock Pro and have used it with 2 different bullet profiles in .308 and seems to have no issues with either. It is one of the most user friendly dies to make changes and set to what...
Rating: (5 of 5 Stars!)
Robert ***
Wednesday 01 May, 2019
works as advertised. increases output nicely versus doing everything by hand. and not as expensive as an electric bullet feeder.
Rating: (5 of 5 Stars!)
Clinton R ***
Saturday 05 January, 2019
Downright the best loader for the 223 that I have tried since having the hornady Lock and load press.
Rating: (5 of 5 Stars!)
TIM ***
Sunday 18 March, 2018
This is the only way to go when it comes to bullet feeders. I tried the Hornady dies first and they are more work than not having one. These are just put it in and go. Great product.
Rating: (5 of 5 Stars!)

Description:

Please be aware of the following:

The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem.

As a solution to this  issue we are pleased to offer our Extra-Short Dillon Powder Bar.

As of Feb 2021 we are transitioning to using longer Rifle insert tubes in order to hold even more bullets in the tube magazine. We are extending the tubes by approx.. 6 inches.
For Dillon 1050 users the tubes will need to be shortened by the user! As they will not fit in beneath the case feeder.

The Rifle Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 70-100 bullets, depending on bullet caliber and length. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder

Using a Bulletfeeder while reloading is a real pleasure. It makes the reloading process faster and much easier. If you have never used one, you are missing out on one of the greatest reloading assists out there! A Bulletfeeder also improves safety, by preventing the need to insert your fingers under the tool head to place your bullets on the brass. Everyone should use one! 

Each magazine of bullet tubes needs to be filled by hand before reloading, much in the same way you would fill your primer tubes before starting your reloading session. With a little practice, it will take you about 2 minutes to fill the tube assembly. And this can be done in advance while watching TV in the comfort of your living room. Additional tube assemblies can be purchases separately (or as a bundle), thus allowing you to pre-load 300, 400 or more bullets before starting your reloading session. 

While reloading, you will see the bullets drop down in the transparent tube, as they feed into the dropper-die assembly. Once a tube is empty, you simply rotate and click the next tube into place and keep reloading. Transition to the next tube takes just a second or two. Once the entire 6-tube magazine is empty, either reload it by hand, or drop your 2nd assembly into place to continue without delay. 

The Mini Mr.Bulletfeeder can be used on any progressive reloading machine which uses the same size dies as Dillon. Be aware that the bullet feeder does require a station in your tool head, directly after the powder dropper. 

We have found it is difficult to use the Mini Mr.Bulletfeeder on a 1050 when a powder check is being used in the following station. This has to do with the angle in which the powder dropper sits, forcing the bullet dropper to rotate further away, over the next station. This is an issue only on a 1050. 

Your Rifle Mini Mr.Bulletfeeder by DAA includes:

1 x 6-Tube Bullet Magazine Assembly

1 x Dropper Die Assembly

3 x Spare Steel Ball-Bearings for Dropper

1 x User Instruction Sheet 

 

No expanding powder funnel is included with this system, because throating the rifle brass in the powder funnel is not possible. That would lead to too small a powder through hole. Flaring the brass must be done as a prep stage or using a modified M-die on the 1050.

We Also Recommend
(11)
Important Note
$68.95
$2.00 Reward points
Also Available In Set(s)

New Products

Important Note
$16.00
$1.00 Reward points
(3)
Important Note
$12.95
Important Note
$68.95
$2.00 Reward points
(1)
Important Note
$79.95
$2.00 Reward points
(3)
Important Note
$15.95
$1.00 Reward points